[RFC V6 2/3] arm:add bitrev.h file to support rbit instruction

[Russell King - ARM Linux]

On Fri, Jan 09, 2015 at 08:40:56PM +0800, Wang, Yalin wrote:
> Oh, I see,
> How about change like this:
> +	select HAVE_ARCH_BITREVERSE if ((CPU_V7M || CPU_V7) && !CPU_V6 && !CPU_V6K)
> I am not sure if I also need add some older CPU types like !CPU_ARM9TDMI &&　!CPU_ARM940T ?
> 
> Another solution is:
> +	select HAVE_ARCH_BITREVERSE if ((CPU_32V7M || CPU_32V7) && !CPU_32V6 && !CPU_32V5 && !CPU_32V4 && !CPU_32V4T && !CPU_32V3)
> 
> By the way, I am not clear about the difference between CPU_V6 and CPU_V6K, could you tell me? :)

I think

	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6

is sufficient - we don't support mixing pre-v6 and v6+ CPU architectures
into a single kernel.

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.