[PATCH] ARM: EXYNOS: enable 4 cores secondary cpu up for exynos5440

[Kukjin Kim]

On 01/07/15 11:31, Ming Lei wrote:
> Hi Kukjin,
> 
Hi Ming Lei,

Sorry for late response.

> On Tue, Jan 1, 2013 at 3:09 AM, Kukjin Kim <kgene.kim at samsung.com> wrote:
>> No need to check power on/off with pmu control to support hotplug
>> in/out on exynos5440. And this patch enables 4 cores on exynos5440.
> 
> Without this patch, oops will be triggered during kernel booting on
> exynos5440, so could this one be pushed out?
> 
Yeah, I know exynos5440 requires this at least kernel boot but something
like soc_is_xxx should be updated with others in these days...so I need
some time for this.

Thanks,
Kukjin

> Thanks,
> Ming Lei
> 
>>
>> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
>> ---
>>  arch/arm/mach-exynos/platsmp.c |   37 ++++++++++++++++++++++---------------
>>  1 file changed, 22 insertions(+), 15 deletions(-)
>>
>> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
>> index c5c840e..495a501 100644
>> --- a/arch/arm/mach-exynos/platsmp.c
>> +++ b/arch/arm/mach-exynos/platsmp.c
>> @@ -40,6 +40,8 @@ static inline void __iomem *cpu_boot_reg_base(void)
>>  {
>>         if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
>>                 return S5P_INFORM5;
>> +       else if (soc_is_exynos5440())
>> +               return (S5P_VA_CHIPID + 0x560);
>>         return S5P_VA_SYSRAM;
>>  }
>>
>> @@ -116,27 +118,30 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct
>>          */
>>         write_pen_release(phys_cpu);
>>
>> -       if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
>> -               __raw_writel(S5P_CORE_LOCAL_PWR_EN,
>> -                            S5P_ARM_CORE1_CONFIGURATION);
>> +       if (!soc_is_exynos5440()) {
>> +               if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
>> +                       __raw_writel(S5P_CORE_LOCAL_PWR_EN,
>> +                                    S5P_ARM_CORE1_CONFIGURATION);
>>
>> -               timeout = 10;
>> +                       timeout = 10;
>>
>> -               /* wait max 10 ms until cpu1 is on */
>> -               while ((__raw_readl(S5P_ARM_CORE1_STATUS)
>> -                       & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
>> -                       if (timeout-- == 0)
>> -                               break;
>> +                       /* wait max 10 ms until cpu1 is on */
>> +                       while ((__raw_readl(S5P_ARM_CORE1_STATUS)
>> +                               & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
>> +                               if (timeout-- == 0)
>> +                                       break;
>>
>> -                       mdelay(1);
>> -               }
>> +                               mdelay(1);
>> +                       }
>>
>> -               if (timeout == 0) {
>> -                       printk(KERN_ERR "cpu1 power enable failed");
>> -                       spin_unlock(&boot_lock);
>> -                       return -ETIMEDOUT;
>> +                       if (timeout == 0) {
>> +                               printk(KERN_ERR "cpu1 power enable failed");
>> +                               spin_unlock(&boot_lock);
>> +                               return -ETIMEDOUT;
>> +                       }
>>                 }
>>         }
>> +
>>         /*
>>          * Send the secondary CPU a soft interrupt, thereby causing
>>          * the boot monitor to read the system wide flags register,
>> @@ -178,6 +183,8 @@ static void __init exynos_smp_init_cpus(void)
>>
>>         if (soc_is_exynos5250())
>>                 ncores = 2;
>> +       else if (soc_is_exynos5440())
>> +               ncores = 4;
>>         else
>>                 ncores = scu_base ? scu_get_core_count(scu_base) : 1;
>>
>> --
>> 1.7.10.4