[PATCH] ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc

[Paul Walmsley]

Hi Suman,

thanks for pitching in on this!

On Tue, 6 Jan 2015, Suman Anna wrote:

> You have removed the return from the above block on failure. If any DT
> entry doesn't have the reg property, this will hang the kernel boot.
> Just remove the "reg" entry from any of the existing DT, and you will
> run into the issue, this is what 6423d6df1440 ("ARM: OMAP2+: hwmod:
> check for module address space during init") fixed. 

Seems like that's the problem that we need to track down, then.  If a 
hwmod has no MPU-accessible registers, it should still be possible to 
init the clocks for the device, etc. ...

> Also, are you sure you want to turn the WARN into a pr_debug, it won't 
> even show during the kernel boot log if the reg base is missing.

No, I'm not sure :-)  I guess it depends how many hwmods we'll have with 
no MPU-accessible registers.  We don't seem to have address ranges for the 
interconnects defined; we could fix that fairly easily. 


- Paul