[PATCH V2 2/3] clk: samsung: exynos7: add clocks for SPI block
Padmavathi Venna
padma.v at samsung.com
Tue Jan 13 03:27:41 PST 2015
Add clock support for 5 SPI channels.
Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
---
.../devicetree/bindings/clock/exynos7-clock.txt | 5 ++
drivers/clk/samsung/clk-exynos7.c | 73 ++++++++++++++++++++
include/dt-bindings/clock/exynos7-clk.h | 19 +++++-
3 files changed, 95 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
index d0e048c..9282f71 100644
--- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
@@ -77,6 +77,11 @@ Input clocks for peric1 clock controller:
- sclk_uart1
- sclk_uart2
- sclk_uart3
+ - sclk_spi0
+ - sclk_spi1
+ - sclk_spi2
+ - sclk_spi3
+ - sclk_spi4
Input clocks for peris clock controller:
- fin_pll
diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index d01d766..d40c09d 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -177,9 +177,15 @@ CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
#define MUX_SEL_TOP00 0x0200
#define MUX_SEL_TOP01 0x0204
#define MUX_SEL_TOP03 0x020C
+#define MUX_SEL_TOP0_PERIC1 0x0234
+#define MUX_SEL_TOP0_PERIC2 0x0238
#define MUX_SEL_TOP0_PERIC3 0x023C
#define DIV_TOP03 0x060C
+#define DIV_TOP0_PERIC1 0x0634
+#define DIV_TOP0_PERIC2 0x0638
#define DIV_TOP0_PERIC3 0x063C
+#define ENABLE_SCLK_TOP0_PERIC1 0x0A34
+#define ENABLE_SCLK_TOP0_PERIC2 0x0A38
#define ENABLE_SCLK_TOP0_PERIC3 0x0A3C
/* List of parent clocks for Muxes in CMU_TOP0 */
@@ -205,9 +211,15 @@ static unsigned long top0_clk_regs[] __initdata = {
MUX_SEL_TOP00,
MUX_SEL_TOP01,
MUX_SEL_TOP03,
+ MUX_SEL_TOP0_PERIC1,
+ MUX_SEL_TOP0_PERIC2,
MUX_SEL_TOP0_PERIC3,
DIV_TOP03,
+ DIV_TOP0_PERIC1,
+ DIV_TOP0_PERIC2,
DIV_TOP0_PERIC3,
+ ENABLE_SCLK_TOP0_PERIC1,
+ ENABLE_SCLK_TOP0_PERIC2,
ENABLE_SCLK_TOP0_PERIC3,
};
@@ -229,10 +241,16 @@ static struct samsung_mux_clock top0_mux_clks[] __initdata = {
MUX(0, "mout_aclk_peric1_66", mout_top0_group1, MUX_SEL_TOP03, 12, 2),
MUX(0, "mout_aclk_peric0_66", mout_top0_group1, MUX_SEL_TOP03, 20, 2),
+ MUX(0, "mout_sclk_spi1", mout_top0_group1, MUX_SEL_TOP0_PERIC1, 8, 2),
+ MUX(0, "mout_sclk_spi0", mout_top0_group1, MUX_SEL_TOP0_PERIC1, 20, 2),
+
+ MUX(0, "mout_sclk_spi3", mout_top0_group1, MUX_SEL_TOP0_PERIC2, 8, 2),
+ MUX(0, "mout_sclk_spi2", mout_top0_group1, MUX_SEL_TOP0_PERIC2, 20, 2),
MUX(0, "mout_sclk_uart3", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 4, 2),
MUX(0, "mout_sclk_uart2", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 8, 2),
MUX(0, "mout_sclk_uart1", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 12, 2),
MUX(0, "mout_sclk_uart0", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 16, 2),
+ MUX(0, "mout_sclk_spi4", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 20, 2),
};
static struct samsung_div_clock top0_div_clks[] __initdata = {
@@ -241,13 +259,29 @@ static struct samsung_div_clock top0_div_clks[] __initdata = {
DIV(DOUT_ACLK_PERIC0, "dout_aclk_peric0_66", "mout_aclk_peric0_66",
DIV_TOP03, 20, 6),
+ DIV(0, "dout_sclk_spi1", "mout_sclk_spi1", DIV_TOP0_PERIC1, 8, 12),
+ DIV(0, "dout_sclk_spi0", "mout_sclk_spi0", DIV_TOP0_PERIC1, 20, 12),
+
+ DIV(0, "dout_sclk_spi3", "mout_sclk_spi3", DIV_TOP0_PERIC2, 8, 12),
+ DIV(0, "dout_sclk_spi2", "mout_sclk_spi2", DIV_TOP0_PERIC2, 20, 12),
+
DIV(0, "dout_sclk_uart3", "mout_sclk_uart3", DIV_TOP0_PERIC3, 4, 4),
DIV(0, "dout_sclk_uart2", "mout_sclk_uart2", DIV_TOP0_PERIC3, 8, 4),
DIV(0, "dout_sclk_uart1", "mout_sclk_uart1", DIV_TOP0_PERIC3, 12, 4),
DIV(0, "dout_sclk_uart0", "mout_sclk_uart0", DIV_TOP0_PERIC3, 16, 4),
+ DIV(0, "dout_sclk_spi4", "mout_sclk_spi4", DIV_TOP0_PERIC3, 20, 12),
};
static struct samsung_gate_clock top0_gate_clks[] __initdata = {
+ GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_sclk_spi1",
+ ENABLE_SCLK_TOP0_PERIC1, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_sclk_spi0",
+ ENABLE_SCLK_TOP0_PERIC1, 20, CLK_SET_RATE_PARENT, 0),
+
+ GATE(CLK_SCLK_SPI3, "sclk_spi3", "dout_sclk_spi3",
+ ENABLE_SCLK_TOP0_PERIC2, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_sclk_spi2",
+ ENABLE_SCLK_TOP0_PERIC2, 20, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_sclk_uart3",
ENABLE_SCLK_TOP0_PERIC3, 4, 0, 0),
GATE(CLK_SCLK_UART2, "sclk_uart2", "dout_sclk_uart2",
@@ -256,6 +290,8 @@ static struct samsung_gate_clock top0_gate_clks[] __initdata = {
ENABLE_SCLK_TOP0_PERIC3, 12, 0, 0),
GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_sclk_uart0",
ENABLE_SCLK_TOP0_PERIC3, 16, 0, 0),
+ GATE(CLK_SCLK_SPI4, "sclk_spi4", "dout_sclk_spi4",
+ ENABLE_SCLK_TOP0_PERIC3, 20, CLK_SET_RATE_PARENT, 0),
};
static struct samsung_fixed_factor_clock top0_fixed_factor_clks[] __initdata = {
@@ -531,6 +567,7 @@ static void __init exynos7_clk_peric0_init(struct device_node *np)
/* Register Offset definitions for CMU_PERIC1 (0x14C80000) */
#define MUX_SEL_PERIC10 0x0200
#define MUX_SEL_PERIC11 0x0204
+#define MUX_SEL_PERIC12 0x0208
#define ENABLE_PCLK_PERIC1 0x0900
#define ENABLE_SCLK_PERIC10 0x0A00
@@ -542,10 +579,16 @@ PNAME(mout_aclk_peric1_66_p) = { "fin_pll", "dout_aclk_peric1_66" };
PNAME(mout_sclk_uart1_p) = { "fin_pll", "sclk_uart1" };
PNAME(mout_sclk_uart2_p) = { "fin_pll", "sclk_uart2" };
PNAME(mout_sclk_uart3_p) = { "fin_pll", "sclk_uart3" };
+PNAME(mout_sclk_spi0_p) = { "fin_pll", "sclk_spi0" };
+PNAME(mout_sclk_spi1_p) = { "fin_pll", "sclk_spi1" };
+PNAME(mout_sclk_spi2_p) = { "fin_pll", "sclk_spi2" };
+PNAME(mout_sclk_spi3_p) = { "fin_pll", "sclk_spi3" };
+PNAME(mout_sclk_spi4_p) = { "fin_pll", "sclk_spi4" };
static unsigned long peric1_clk_regs[] __initdata = {
MUX_SEL_PERIC10,
MUX_SEL_PERIC11,
+ MUX_SEL_PERIC12,
ENABLE_PCLK_PERIC1,
ENABLE_SCLK_PERIC10,
};
@@ -554,6 +597,16 @@ static struct samsung_mux_clock peric1_mux_clks[] __initdata = {
MUX(0, "mout_aclk_peric1_66_user", mout_aclk_peric1_66_p,
MUX_SEL_PERIC10, 0, 1),
+ MUX_F(0, "mout_sclk_spi0_user", mout_sclk_spi0_p,
+ MUX_SEL_PERIC11, 0, 1, CLK_SET_RATE_PARENT, 0),
+ MUX_F(0, "mout_sclk_spi1_user", mout_sclk_spi1_p,
+ MUX_SEL_PERIC11, 4, 1, CLK_SET_RATE_PARENT, 0),
+ MUX_F(0, "mout_sclk_spi2_user", mout_sclk_spi2_p,
+ MUX_SEL_PERIC11, 8, 1, CLK_SET_RATE_PARENT, 0),
+ MUX_F(0, "mout_sclk_spi3_user", mout_sclk_spi3_p,
+ MUX_SEL_PERIC11, 12, 1, CLK_SET_RATE_PARENT, 0),
+ MUX_F(0, "mout_sclk_spi4_user", mout_sclk_spi4_p,
+ MUX_SEL_PERIC11, 16, 1, CLK_SET_RATE_PARENT, 0),
MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_p,
MUX_SEL_PERIC11, 20, 1),
MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_p,
@@ -579,6 +632,16 @@ static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
ENABLE_PCLK_PERIC1, 10, 0, 0),
GATE(PCLK_UART3, "pclk_uart3", "mout_aclk_peric1_66_user",
ENABLE_PCLK_PERIC1, 11, 0, 0),
+ GATE(PCLK_SPI0, "pclk_spi0", "mout_aclk_peric1_66_user",
+ ENABLE_PCLK_PERIC1, 12, 0, 0),
+ GATE(PCLK_SPI1, "pclk_spi1", "mout_aclk_peric1_66_user",
+ ENABLE_PCLK_PERIC1, 13, 0, 0),
+ GATE(PCLK_SPI2, "pclk_spi2", "mout_aclk_peric1_66_user",
+ ENABLE_PCLK_PERIC1, 14, 0, 0),
+ GATE(PCLK_SPI3, "pclk_spi3", "mout_aclk_peric1_66_user",
+ ENABLE_PCLK_PERIC1, 15, 0, 0),
+ GATE(PCLK_SPI4, "pclk_spi4", "mout_aclk_peric1_66_user",
+ ENABLE_PCLK_PERIC1, 16, 0, 0),
GATE(SCLK_UART1, "sclk_uart1_user", "mout_sclk_uart1_user",
ENABLE_SCLK_PERIC10, 9, 0, 0),
@@ -586,6 +649,16 @@ static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
ENABLE_SCLK_PERIC10, 10, 0, 0),
GATE(SCLK_UART3, "sclk_uart3_user", "mout_sclk_uart3_user",
ENABLE_SCLK_PERIC10, 11, 0, 0),
+ GATE(SCLK_SPI0, "sclk_spi0_user", "mout_sclk_spi0_user",
+ ENABLE_SCLK_PERIC10, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(SCLK_SPI1, "sclk_spi1_user", "mout_sclk_spi1_user",
+ ENABLE_SCLK_PERIC10, 13, CLK_SET_RATE_PARENT, 0),
+ GATE(SCLK_SPI2, "sclk_spi2_user", "mout_sclk_spi2_user",
+ ENABLE_SCLK_PERIC10, 14, CLK_SET_RATE_PARENT, 0),
+ GATE(SCLK_SPI3, "sclk_spi3_user", "mout_sclk_spi3_user",
+ ENABLE_SCLK_PERIC10, 15, CLK_SET_RATE_PARENT, 0),
+ GATE(SCLK_SPI4, "sclk_spi4_user", "mout_sclk_spi4_user",
+ ENABLE_SCLK_PERIC10, 16, CLK_SET_RATE_PARENT, 0),
};
static struct samsung_cmu_info peric1_cmu_info __initdata = {
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
index 05e2a47..75c5888 100644
--- a/include/dt-bindings/clock/exynos7-clk.h
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -28,7 +28,12 @@
#define CLK_SCLK_UART1 4
#define CLK_SCLK_UART2 5
#define CLK_SCLK_UART3 6
-#define TOP0_NR_CLK 7
+#define CLK_SCLK_SPI0 7
+#define CLK_SCLK_SPI1 8
+#define CLK_SCLK_SPI2 9
+#define CLK_SCLK_SPI3 10
+#define CLK_SCLK_SPI4 11
+#define TOP0_NR_CLK 12
/* TOP1 */
#define DOUT_ACLK_FSYS1_200 1
@@ -72,7 +77,17 @@
#define PCLK_HSI2C6 9
#define PCLK_HSI2C7 10
#define PCLK_HSI2C8 11
-#define PERIC1_NR_CLK 12
+#define PCLK_SPI0 12
+#define PCLK_SPI1 13
+#define PCLK_SPI2 14
+#define PCLK_SPI3 15
+#define PCLK_SPI4 16
+#define SCLK_SPI0 17
+#define SCLK_SPI1 18
+#define SCLK_SPI2 19
+#define SCLK_SPI3 20
+#define SCLK_SPI4 21
+#define PERIC1_NR_CLK 22
/* PERIS */
#define PCLK_CHIPID 1
--
1.7.4.4
More information about the linux-arm-kernel
mailing list