[PATCH v3 00/19] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

[Javier Martinez Canillas]

Hello Joonyoung,

On 01/13/2015 06:24 AM, Joonyoung Shim wrote:
>> 
>> Also, the SW_ACLK_300_DISP1 and USER_ACLK_300_DISP1 are needed for the FIMD
>> parent and input clock respectively. Adding those to the clocks list of the
>> DISP1 power domain gives me working display + HDMI on my Exynos5800 Peach Pi.
>> 
>> These are the changes I have now [0]. Please let me know what you think.
>> 
> 
> Good, it's working with your patch without u-boot changes and reverting
> of commit 2ed127697eb.
>

Perfect, I'll split the the clk and DTS changes in different patches and
post the series once we figure out the "power-domain disable failed" issue.

>> 
>> Yes, I was not able to trigger that by running modetest but by turning off
>> my HDMI monitor and then turning it on again. When the monitor is turned
>> on then I see a "Power domain power-domain disable failed" and the imprecise
>> external abort error.
>> 
>> I had to disable CONFIG_DRM_EXYNOS_DP in order to trigger though and that
>> is why I was not able to reproduce it before.
>> 
>> I think though that this is a separate issue of the HDMI not working since
>> power domains should be able to have many consumers devices and I see that
>> other power domains are used that way.
>> 
> 
> OK, we need more investigation.
> 

Agreed, since even though I think this is a separate issue, I'll prefer
to not add a known bug as a side effect of having a working HDMI.

Best regard,
Javier