[PATCH v6 08/17] ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init

[Hanjun Guo]

On 2015年01月12日 19:41, Lorenzo Pieralisi wrote:
> On Mon, Jan 12, 2015 at 04:26:41AM +0000, Hanjun Guo wrote:
>> On 2015年01月10日 03:04, Lorenzo Pieralisi wrote:
>>> On Sun, Jan 04, 2015 at 10:55:09AM +0000, Hanjun Guo wrote:
>>>> There are two flags: PSCI_COMPLIANT and PSCI_USE_HVC. When set,
>>>> the former signals to the OS that the firmware is PSCI compliant.
>>>> The latter selects the appropriate conduit for PSCI calls by
>>>> toggling between Hypervisor Calls (HVC) and Secure Monitor Calls
>>>> (SMC).
>>>>
>>>> FADT table contains such information, parse FADT to get the flags
>>>> for PSCI init. Since ACPI 5.1 doesn't support self defined PSCI
>>>> function IDs, which means that only PSCI 0.2+ is supported in ACPI.
>>>>
>>>> At the same time, only ACPI 5.1 or higher verison supports PSCI,
>>>> and FADT Major.Minor version was introduced in ACPI 5.1, so we
>>>> will check the version and only parse FADT table with version >= 5.1.
>>>>
>>>> If firmware provides ACPI tables with ACPI version less than 5.1,
>>>> OS will be messed up with those information and have no way to init
>>>> smp and GIC, so disable ACPI if we get an FADT table with version
>>>> less that 5.1.
>>>
>>> I am a bit confused by this log. I understand the problem is that,
>>> for versions predating 5.1, PSCI information is missing. So, I would
>>> say:
>>>
>>> "OS will not be able to boot properly owing to missing PSCI bindings
>>> data in the ACPI tables".
>>>
>>> Is that the message you want to get across ?
>>
>> Not exactly. PSCI is part of the updates for ACPI 5.1, and more updates
>> are for GIC (MADT table), without those updates in GIC (MADT table), we
>> can not get the MPIDR for SMP init, and can not get the right GICC
>> base_address for GICv2 init too (GICC base_address was there in ACPI 5.0
>> , but the offset to the start of the structure was changed in ACPI 5.1)
>> so if we use the ACPI 5.1 OS code to parse ACPI 5.0 firmware table, it
>> will messed up teh OS boot, not only because of PSCI.
>>
>> Should I update the Change log here?
>
> Thanks for the explanation.
>
> So basically this means you can't boot arm64 ACPI with table versions
> predating 5.1, right ?

Yes, it is, sorry I didn't describe it clearly in the change log.

> Or (version >= 5.1) is a requirement only if
> PSCI is the enable method ?
>
> It is what I thought, basically IIUC you are merging two patches in one.
> This patch is supposed to get PSCI flags from ACPI tables (ie init PSCI from
> ACPI tables), checking the version (which of course is a prerequisite
> for parsing PSCI flags too) should have been done in a separate patch,
> possibly squashed with the ACPI tables initialization.
>
> I think you should split the patch and be done with that.
>
> [...]
>
>>>> +static int __init acpi_parse_fadt(struct acpi_table_header *table)
>>>> +{
>>>> +    struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
>>>> +
>>>> +    /*
>>>> +     * Revision in table header is the FADT Major revision,
>>>> +     * and there is a minor revision of FADT which was introduced
>>>> +     * by ACPI 5.1, we only deal with ACPI 5.1 or newer revision
>>>> +     * to get arm boot flags, or we will disable ACPI.
>>>> +     */
>>>> +    if (table->revision > 5 ||
>>>> +        (table->revision == 5 && fadt->minor_revision >= 1))
>>>> +            return 0;
>>>> +
>>>> +    pr_warn("Unsupported FADT revision %d.%d, should be 5.1+, will disable ACPI\n",
>>>> +            table->revision, fadt->minor_revision);
>>>> +    disable_acpi();
>>>
>>> I would rename this function, function is checking the FADT
>>> revision, make that clear. I think that disable_acpi() should be
>>> called on function return, if it fails.
>>>
>>> To make the "acpi disabling" clearer, why not call this function in
>>>
>>> psci_acpi_init()
>>>
>>> something like:
>>>
>>> int __init psci_acpi_init(void)
>>> {
>>>
>>>        if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) {
>>>                pr_err("Can't find FADT or error happened during parsing FADT\n");
>>>                disable_acpi();
>>>        }
>>>        ...
>>> }
>>>
>>> After all you disable ACPI because you can't retrieve PSCI information,
>>> am I right ?
>>
>> I think we need to consider two scenes:
>>
>>    - ACPI version less than 5.1, it definitely needs to disable ACPI
>>      because of OS doesn't support that and we don't need to do it;
>
> Patch 1. Actually, why can't you carry out the check at acpi tables
> init instead of executing the check when PSCI is initialized ?
>
> Is version >5.1 a requirement only if booting with PSCI ? It does not
> seem so from what you said above.
>
>>    - if ACPI version is 5.1 or later, and PSCI flags are missing in
>>      FADT table, I think we still can boot the OS with single core (
>>      if Parking Protocol is still missing) and print some warning message
>>      instead (you can refer to patch 10/17). just disable ACPI may lead
>>      to boot failure.
>
> And patch 2, which is what this patch was devised for, to initialize
> PSCI from ACPI tables.
>
>> Does it make sense?
>
> Yes, that's why this patch should be split, because it is implementing two
> pieces of functionality at once.
>
> Put it differently, checking the version is a requirement that goes beyond
> PSCI, as you described above, I do not see why you want to merge the
> version check and PSCI init together, it obfuscates.

ok, make sense to me, I will split this patch into two, and update
the comments/change log to make it explicit.

>
>>
>>>
>>>> +
>>>> +    return -EINVAL;
>>>> +}
>>>> +
>>>>    /*
>>>>     * acpi_boot_table_init() called from setup_arch(), always.
>>>>     * 1. find RSDP and get its address, and then find XSDT
>>>>     * 2. extract all tables and checksums them all
>>>> + *  3. check ACPI FADT revisoin
>>>
>>> s/revisoin/revision
>>
>> Good catch, will update it.
>>
>>>
>>>>     *
>>>>     * We can parse ACPI boot-time tables such as MADT after
>>>>     * this function is called.
>>>> @@ -64,8 +88,13 @@ void __init acpi_boot_table_init(void)
>>>>               return;
>>>>
>>>>       /* Initialize the ACPI boot-time table parser. */
>>>> -    if (acpi_table_init())
>>>> +    if (acpi_table_init()) {
>>>>               disable_acpi();
>>>> +            return;
>>>> +    }
>>>> +
>>>> +    if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
>>>> +            pr_err("Can't find FADT or error happened during parsing FADT\n");
>>>
>>> As I said above this is a bit sneaky. It is not clear you are disabling
>>> ACPI when the acpi_table_parse() call fails. Is it not better to move
>>> the revision check in the PSCI ACPI init call ?
>>
>> please refer to the comments above.
>>
>>>
>>>>    }
>>>>
>>>>    static int __init parse_acpi(char *arg)
>>>> diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
>>>> index f1dbca7..dbb3945 100644
>>>> --- a/arch/arm64/kernel/psci.c
>>>> +++ b/arch/arm64/kernel/psci.c
>>>> @@ -15,6 +15,7 @@
>>>>
>>>>    #define pr_fmt(fmt) "psci: " fmt
>>>>
>>>> +#include <linux/acpi.h>
>>>>    #include <linux/init.h>
>>>>    #include <linux/of.h>
>>>>    #include <linux/smp.h>
>>>> @@ -24,6 +25,7 @@
>>>>    #include <linux/slab.h>
>>>>    #include <uapi/linux/psci.h>
>>>>
>>>> +#include <asm/acpi.h>
>>>>    #include <asm/compiler.h>
>>>>    #include <asm/cpu_ops.h>
>>>>    #include <asm/errno.h>
>>>> @@ -304,6 +306,33 @@ static void psci_sys_poweroff(void)
>>>>       invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
>>>>    }
>>>>
>>>> +static void psci_0_2_set_functions(void)
>>>
>>> __init ?
>>
>> Yes, it only called by __init function, can be defined as
>> __init too.
>>
>
> It can and should :)

I will update in next version :)

Thanks
Hanjun