[PATCH v5] can: Convert to runtime_pm
Sören Brinkmann
soren.brinkmann at xilinx.com
Mon Jan 12 10:45:04 PST 2015
On Mon, 2015-01-12 at 08:34PM +0530, Kedareswara rao Appana wrote:
> Instead of enabling/disabling clocks at several locations in the driver,
> Use the runtime_pm framework. This consolidates the actions for runtime PM
> In the appropriate callbacks and makes the driver more readable and mantainable.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann at xilinx.com>
> Signed-off-by: Kedareswara rao Appana <appanad at xilinx.com>
> ---
> Changes for v5:
> - Updated with the review comments.
> Updated the remove fuction to use runtime_pm.
> Chnages for v4:
> - Updated with the review comments.
> Changes for v3:
> - Converted the driver to use runtime_pm.
> Changes for v2:
> - Removed the struct platform_device* from suspend/resume
> as suggest by Lothar.
>
> drivers/net/can/xilinx_can.c | 157 ++++++++++++++++++++++++++++-------------
> 1 files changed, 107 insertions(+), 50 deletions(-)
[..]
> +static int __maybe_unused xcan_runtime_resume(struct device *dev)
> {
> - struct platform_device *pdev = dev_get_drvdata(dev);
> - struct net_device *ndev = platform_get_drvdata(pdev);
> + struct net_device *ndev = dev_get_drvdata(dev);
> struct xcan_priv *priv = netdev_priv(ndev);
> int ret;
> + u32 isr, status;
>
> ret = clk_enable(priv->bus_clk);
> if (ret) {
> @@ -1014,15 +1030,28 @@ static int __maybe_unused xcan_resume(struct device *dev)
> ret = clk_enable(priv->can_clk);
> if (ret) {
> dev_err(dev, "Cannot enable clock.\n");
> - clk_disable_unprepare(priv->bus_clk);
> + clk_disable(priv->bus_clk);
[...]
> @@ -1173,12 +1219,23 @@ static int xcan_remove(struct platform_device *pdev)
> {
> struct net_device *ndev = platform_get_drvdata(pdev);
> struct xcan_priv *priv = netdev_priv(ndev);
> + int ret;
> +
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret < 0) {
> + netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> + __func__, ret);
> + return ret;
> + }
>
> if (set_reset_mode(ndev) < 0)
> netdev_err(ndev, "mode resetting failed!\n");
>
> unregister_candev(ndev);
> + pm_runtime_disable(&pdev->dev);
> netif_napi_del(&priv->napi);
> + clk_disable_unprepare(priv->bus_clk);
> + clk_disable_unprepare(priv->can_clk);
Shouldn't pretty much all these occurrences of clk_disable/enable
disappear? This should all be handled by the runtime_pm framework now.
Sören
More information about the linux-arm-kernel
mailing list