[PATCH v3 18/21] ARM: shmobile: remove use of gic_arch_extn.irq_set_wake
Marc Zyngier
marc.zyngier at arm.com
Mon Jan 12 10:26:24 PST 2015
shmobile only uses gic_arch_extn.irq_set_wake to prevent the GIC
from returning -ENXIO when receiving a wake-up configuration request.
It is a lot simpler to tell the irq layer that we don't need any
configuration by using the IRQCHIP_SKIP_SET_WAKE, thanks to the
new gic_set_irqchip_flags function.
Acked-by: Simon Horman <horms+renesas at verge.net.au>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
arch/arm/mach-shmobile/intc-sh73a0.c | 7 +------
arch/arm/mach-shmobile/setup-r8a7779.c | 7 +------
2 files changed, 2 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 9e36180..fd63ae6 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -252,11 +252,6 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
-{
- return 0; /* always allow wakeup */
-}
-
#define PINTER0_PHYS 0xe69000a0
#define PINTER1_PHYS 0xe69000a4
#define PINTER0_VIRT IOMEM(0xe69000a0)
@@ -318,8 +313,8 @@ void __init sh73a0_init_irq(void)
void __iomem *gic_cpu_base = IOMEM(0xf0000100);
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+ gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE);
gic_init(0, 29, gic_dist_base, gic_cpu_base);
- gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
register_intc_controller(&intc_pint0_desc);
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 6156d17..989de2d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -713,14 +713,9 @@ void __init r8a7779_init_late(void)
}
#ifdef CONFIG_USE_OF
-static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
-{
- return 0; /* always allow wakeup */
-}
-
void __init r8a7779_init_irq_dt(void)
{
- gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+ gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE);
irqchip_init();
--
2.1.4
More information about the linux-arm-kernel
mailing list