[PATCH 3/3] ARM: dts: sun8i: Add dts file for Ippo Q8H v1.2 tablets

[Hans de Goede]

Hi,

On 12-01-15 12:24, Maxime Ripard wrote:
> Hi,
>
> On Wed, Jan 07, 2015 at 09:16:15PM +0100, Hans de Goede wrote:
>> The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
>> dtb file since some gpio-s surrounding the wlan/bluetooth are different,
>> it uses different camera sensors, and different DRAM timings.
>>
>> Note that atm neither the wlan/bluetooth nor the camera are supported, so
>> atm their is no difference between the dts files, but because of the different
>> DRAM timings there are already separate u-boot configs for the 2 different
>> versions, and the 1.2 config refers to sun8i-a23-ippo-q8h-v1.2.dtb to be
>> future proof, so we need to provide a sun8i-a23-ippo-q8h-v1.2.dtb file.
>>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>>   arch/arm/boot/dts/Makefile                    |  3 +-
>>   arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts | 58 +++++++++++++++++++++++++++
>>   2 files changed, 60 insertions(+), 1 deletion(-)
>>   create mode 100644 arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 4142831..7f66bab 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -478,7 +478,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>>   	sun7i-a20-olinuxino-micro.dtb \
>>   	sun7i-a20-pcduino3.dtb
>>   dtb-$(CONFIG_MACH_SUN8I) += \
>> -	sun8i-a23-ippo-q8h-v5.dtb
>> +	sun8i-a23-ippo-q8h-v5.dtb \
>> +	sun8i-a23-ippo-q8h-v1.2.dtb
>>   dtb-$(CONFIG_MACH_SUN9I) += \
>>   	sun9i-a80-optimus.dtb
>>   dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
>> diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
>> new file mode 100644
>> index 0000000..7056fc2
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
>> @@ -0,0 +1,58 @@
>> +/*
>> + * Copyright 2015 Hans de Goede <hdegoede at redhat.com>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This file is free software; you can redistribute it and/or
>> + *     modify it under the terms of the GNU General Public License as
>> + *     published by the Free Software Foundation; either version 2 of the
>> + *     License, or (at your option) any later version.
>> + *
>> + *     This file is distributed in the hope that it will be useful,
>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *     GNU General Public License for more details.
>> + *
>> + *     You should have received a copy of the GNU General Public
>> + *     License along with this file; if not, write to the Free
>> + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
>> + *     MA 02110-1301 USA
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/*
>> + * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
>> + * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
>> + * and it uses different camera sensors.
>> + */
>> +
>> +#include "sun8i-a23-ippo-q8h-v5.dts"
>> +
>> +/ {
>> +	model = "Ippo Q8H Dual Core Tablet (v1.2)";
>
> Maybe we should have a separate compatible too then, if we ever need
> to differentiate the two for any other reason (quirks, mostly)?
>
> Something like
>    compatible = "ippo,q8h-v5", "ippo,q8h", "allwinner,sun8i-a23";
> and
>    compatible = "ippo,q8h-v1.2", "ippo,q8h", "allwinner,sun8i-a23";
>
> in their respective DTs?

Good idea, I'll fix this when I respin this patch-set.

Regards,

Hans