[PATCH v6 08/20] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value
Andre Przywara
andre.przywara at arm.com
Mon Jan 12 01:34:42 PST 2015
Hi Christoffer,
On 11/01/15 14:58, Christoffer Dall wrote:
> On Fri, Jan 09, 2015 at 11:54:26AM +0000, Andre Przywara wrote:
>> Currently the maximum number of vCPUs supported is a global value
>> limited by the used GIC model. GICv3 will lift this limit, but we
>> still need to observe it for guests using GICv2.
>> So the maximum number of vCPUs is per-VM value, depending on the
>> GIC model the guest uses.
>> Store and check the value in struct kvm_arch, but keep it down to
>> 8 for now.
>>
>> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
>> ---
>> Changelog v5...v6:
>> - adapt to 3.19-rc changes and to changes due to new 05/20
>>
>> Changelog v4...v5:
>> - add define for GIC_V2_MAX_CPUS
>> - rename max_hw_vcpus
>> - add prototype for ARM non-VGIC configs
>>
>> Changelog v3...v4:
>> - initialize max_vcpus with limit based on host GIC
>> - remove *_init_emul_* from VGIC backend
>> - refine VCPU limit on VGIC creation
>> - print warning when userland tries to create more VCPUs than supported
>>
>> arch/arm/include/asm/kvm_host.h | 1 +
>> arch/arm/kvm/arm.c | 8 ++++++++
>> arch/arm64/include/asm/kvm_host.h | 3 +++
>> include/kvm/arm_vgic.h | 8 ++++++++
>> virt/kvm/arm/vgic-v2.c | 1 +
>> virt/kvm/arm/vgic-v3.c | 1 +
>> virt/kvm/arm/vgic.c | 22 ++++++++++++++++++++++
>> 7 files changed, 44 insertions(+)
>>
>> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
>> index a4e1155..60c52ad 100644
>> --- a/arch/arm/include/asm/kvm_host.h
>> +++ b/arch/arm/include/asm/kvm_host.h
>> @@ -68,6 +68,7 @@ struct kvm_arch {
>>
>> /* Interrupt controller */
>> struct vgic_dist vgic;
>> + int max_vcpus;
>> };
>>
>> #define KVM_NR_MEM_OBJS 40
>> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
>> index dd1a689..c33e4ab 100644
>> --- a/arch/arm/kvm/arm.c
>> +++ b/arch/arm/kvm/arm.c
>> @@ -132,6 +132,9 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
>> /* Mark the initial VMID generation invalid */
>> kvm->arch.vmid_gen = 0;
>>
>> + /* The maximum number of VCPUs is limited by the host's GIC model */
>> + kvm->arch.max_vcpus = kvm_vgic_get_max_vcpus();
>> +
>> return ret;
>> out_free_stage2_pgd:
>> kvm_free_stage2_pgd(kvm);
>> @@ -218,6 +221,11 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
>> goto out;
>> }
>>
>> + if (id >= kvm->arch.max_vcpus) {
>> + err = -EINVAL;
>> + goto out;
>> + }
>> +
>> vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
>> if (!vcpu) {
>> err = -ENOMEM;
>> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
>> index 37c4ff1..544de35 100644
>> --- a/arch/arm64/include/asm/kvm_host.h
>> +++ b/arch/arm64/include/asm/kvm_host.h
>> @@ -59,6 +59,9 @@ struct kvm_arch {
>> /* VTTBR value associated with above pgd and vmid */
>> u64 vttbr;
>>
>> + /* The maximum number of vCPUs depends on the used GIC model */
>> + int max_vcpus;
>> +
>> /* Interrupt controller */
>> struct vgic_dist vgic;
>>
>> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
>> index dd24396..1c0e9db 100644
>> --- a/include/kvm/arm_vgic.h
>> +++ b/include/kvm/arm_vgic.h
>> @@ -33,6 +33,7 @@
>> #define VGIC_V2_MAX_LRS (1 << 6)
>> #define VGIC_V3_MAX_LRS 16
>> #define VGIC_MAX_IRQS 1024
>> +#define VGIC_V2_MAX_CPUS 8
>>
>> /* Sanity checks... */
>> #if (KVM_MAX_VCPUS > 8)
>> @@ -132,6 +133,7 @@ struct vgic_params {
>> unsigned int maint_irq;
>> /* Virtual control interface base address */
>> void __iomem *vctrl_base;
>> + int max_gic_vcpus;
>> };
>>
>> struct vgic_vm_ops {
>> @@ -289,6 +291,7 @@ struct kvm_exit_mmio;
>> int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write);
>> int kvm_vgic_hyp_init(void);
>> int kvm_vgic_map_resources(struct kvm *kvm);
>> +int kvm_vgic_get_max_vcpus(void);
>> int kvm_vgic_create(struct kvm *kvm, u32 type);
>> void kvm_vgic_destroy(struct kvm *kvm);
>> void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu);
>> @@ -393,6 +396,11 @@ static inline bool vgic_ready(struct kvm *kvm)
>> {
>> return true;
>> }
>> +
>> +static inline int kvm_vgic_get_max_vcpus(void)
>> +{
>> + return KVM_MAX_VCPUS;
>> +}
>> #endif
>>
>> #endif
>> diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
>> index e1cd3cb..e8b82b2 100644
>> --- a/virt/kvm/arm/vgic-v2.c
>> +++ b/virt/kvm/arm/vgic-v2.c
>> @@ -237,6 +237,7 @@ int vgic_v2_probe(struct device_node *vgic_node,
>> vctrl_res.start, vgic->maint_irq);
>>
>> vgic->type = VGIC_V2;
>> + vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;
>> *ops = &vgic_v2_ops;
>> *params = vgic;
>> goto out;
>> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
>> index d14c75f..ea39bad 100644
>> --- a/virt/kvm/arm/vgic-v3.c
>> +++ b/virt/kvm/arm/vgic-v3.c
>> @@ -235,6 +235,7 @@ int vgic_v3_probe(struct device_node *vgic_node,
>> vgic->vcpu_base = vcpu_res.start;
>> vgic->vctrl_base = NULL;
>> vgic->type = VGIC_V3;
>> + vgic->max_gic_vcpus = KVM_MAX_VCPUS;
>>
>> kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
>> vcpu_res.start, vgic->maint_irq);
>> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
>> index 73cc18e..2bfaf53 100644
>> --- a/virt/kvm/arm/vgic.c
>> +++ b/virt/kvm/arm/vgic.c
>> @@ -1868,6 +1868,17 @@ static int vgic_vcpu_init_maps(struct kvm_vcpu *vcpu, int nr_irqs)
>> return 0;
>> }
>>
>> +/**
>> + * kvm_vgic_get_max_vcpus - Get the maximum number of VCPUs allowed by HW
>> + *
>> + * The host's GIC naturally limits the maximum amount of VCPUs a guest
>> + * can use.
>> + */
>> +int kvm_vgic_get_max_vcpus(void)
>> +{
>> + return vgic->max_gic_vcpus;
>> +}
>> +
>> void kvm_vgic_destroy(struct kvm *kvm)
>> {
>> struct vgic_dist *dist = &kvm->arch.vgic;
>> @@ -2063,6 +2074,8 @@ static int vgic_v2_init_emulation(struct kvm *kvm)
>> dist->vm_ops.init_model = vgic_v2_init_model;
>> dist->vm_ops.map_resources = vgic_v2_map_resources;
>>
>> + kvm->arch.max_vcpus = VGIC_V2_MAX_CPUS;
>> +
>> return 0;
>> }
>>
>> @@ -2079,6 +2092,15 @@ static int init_vgic_model(struct kvm *kvm, int type)
>> break;
>> }
>>
>> + if (ret)
>> + return ret;
>
> it looks like these vgic_vX_init_emulation functions don't ever return
> an error, so why not make them void functions instead, and just handle
> the error with a direct error return in the default case in the switch
> statement and get rid of the 'ret' variable completely?
Possibly, could well be that there were some sensible return values in
one of the earlier versions. Will think about it also in connection with
your comment in that other patch.
>> +
>> + if (atomic_read(&kvm->online_vcpus) > kvm->arch.max_vcpus) {
>> + pr_warn_ratelimited("VGIC model only supports up to %d vCPUs\n",
>> + kvm->arch.max_vcpus);
>> + ret = -EINVAL;
>
> I think Marc would prefer if we got rid of the pr_warn (or replaced it
> with a kvm_debug()). Not printing anything and returning something else
> like ENXIO or E2BIG or something would work for me.
Right, and I am quite sure that I fixed that, but it must have fallen
through the cracks like the other smaller corrections. Sorry about that!
Cheers,
Andre.
>> + }
>> +
>> return ret;
>> }
>>
>> --
>> 1.7.9.5
>>
>
> Otherwise looks good.
>
> -Christoffer
>
More information about the linux-arm-kernel
mailing list