[PATCH v3 3/4] arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile

Matthias Brugger matthias.bgg at gmail.com
Sun Jan 11 12:12:57 PST 2015


2014-12-26 9:26 GMT+01:00 Eddie Huang <eddie.huang at mediatek.com>:
> Add device tree support for MT8173 SoC and evaluation board based on it.
>
> Signed-off-by: Eddie Huang <eddie.huang at mediatek.com>
> ---
>  arch/arm64/boot/dts/Makefile                |   1 +
>  arch/arm64/boot/dts/mediatek/Makefile       |   5 +
>  arch/arm64/boot/dts/mediatek/mt8173-evb.dts |  34 ++++++
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi    | 159 ++++++++++++++++++++++++++++
>  4 files changed, 199 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/Makefile
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-evb.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8173.dtsi
>
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 3b8d427..89124e4 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -2,6 +2,7 @@ dts-dirs += amd
>  dts-dirs += apm
>  dts-dirs += arm
>  dts-dirs += cavium
> +dts-dirs += mediatek
>
>  always         := $(dtb-y)
>  subdir-y       := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> new file mode 100644
> index 0000000..3ce2462
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -0,0 +1,5 @@
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> +
> +always         := $(dtb-y)
> +subdir-y       := $(dts-dirs)
> +clean-files    := *.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> new file mode 100644
> index 0000000..b8b2621
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: Eddie Huang <eddie.huang at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "mt8173.dtsi"
> +
> +/ {
> +       model = "mediatek,mt8173-evb";
> +
> +       aliases {
> +               serial0 = &uart0;
> +               serial1 = &uart1;
> +               serial2 = &uart2;
> +               serial3 = &uart3;
> +       };
> +
> +       memory at 40000000 {
> +               device_type = "memory";
> +               reg = <0 0x40000000 0 0x80000000>;
> +       };
> +
> +       chosen { };
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> new file mode 100644
> index 0000000..a4ea0b3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -0,0 +1,159 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: Eddie Huang <eddie.huang at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +       compatible = "mediatek,mt8173";
> +       interrupt-parent = <&sysirq>;
> +       #address-cells = <2>;
> +       #size-cells = <2>;
> +
> +       cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               cpu-map {
> +                       cluster0 {
> +                               core0 {
> +                                       cpu = <&cpu0>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu1>;
> +                               };
> +                       };
> +
> +                       cluster1 {
> +                               core0 {
> +                                       cpu = <&cpu2>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu3>;
> +                               };
> +                       };
> +               };
> +
> +               cpu0: cpu at 0 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x000>;
> +               };
> +
> +               cpu1: cpu at 1 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x001>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu2: cpu at 100 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a57";
> +                       reg = <0x100>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu3: cpu at 101 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a57";
> +                       reg = <0x101>;
> +                       enable-method = "psci";
> +               };
> +       };
> +
> +       psci {
> +               compatible = "arm,psci";
> +               method = "smc";
> +               cpu_suspend   = <0x84000001>;
> +               cpu_off       = <0x84000002>;
> +               cpu_on        = <0x84000003>;
> +       };
> +
> +       uart_clk: dummy26m {
> +               compatible = "fixed-clock";
> +               clock-frequency = <26000000>;
> +               #clock-cells = <0>;
> +       };
> +
> +       timer {
> +               compatible = "arm,armv8-timer";
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_PPI 13
> +                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +                            <GIC_PPI 14
> +                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +                            <GIC_PPI 11
> +                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +                            <GIC_PPI 10
> +                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +       };
> +
> +       soc {
> +               #address-cells = <2>;
> +               #size-cells = <2>;
> +               compatible = "simple-bus";
> +               ranges;
> +
> +               sysirq: intpol-controller at 10200620 {
> +                       compatible = "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq";

Please update the dts bindings for sysirq and add mediatek,mt8173-sysirq.
Also check that the lines in this patch does not exceed the 80 character limit.

> +                       interrupt-controller;
> +                       #interrupt-cells = <3>;
> +                       interrupt-parent = <&gic>;
> +                       reg = <0 0x10200620 0 0x20>;
> +               };
> +
> +               gic: interrupt-controller at 10220000 {
> +                       compatible = "arm,gic-400";
> +                       #interrupt-cells = <3>;
> +                       interrupt-parent = <&gic>;
> +                       interrupt-controller;
> +                       reg = <0 0x10221000 0 0x1000>,
> +                             <0 0x10222000 0 0x2000>,
> +                             <0 0x10224000 0 0x2000>,
> +                             <0 0x10226000 0 0x2000>;
> +                       interrupts = <GIC_PPI 9
> +                               (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +               };
> +
> +               uart0: serial at 11002000 {
> +                       compatible = "mediatek,mt8173-uart","mediatek,mt6577-uart";

Please update the dts binding documentation.

> +                       reg = <0 0x11002000 0 0x400>;
> +                       interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
> +                       clocks = <&uart_clk>;
> +               };

Please disable the uart ports in the dtsi and enable the one used by
the board in the dts.
See [0] and [1] on how to do this.

Apart from that, the series looks fine to me.

Thanks,
Matthias

[0] https://github.com/mbgg/linux-mediatek/commit/0714947369cdb2b9b8cc24aa07264d4b61ea4fd9
[1] https://github.com/mbgg/linux-mediatek/commit/ac00aa4dcd085e4cf01761095ec1e2a141f86f38


> +
> +               uart1: serial at 11003000 {
> +                       compatible = "mediatek,mt8173-uart","mediatek,mt6577-uart";
> +                       reg = <0 0x11003000 0 0x400>;
> +                       interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
> +                       clocks = <&uart_clk>;
> +               };
> +
> +               uart2: serial at 11004000 {
> +                       compatible = "mediatek,mt8173-uart","mediatek,mt6577-uart";
> +                       reg = <0 0x11004000 0 0x400>;
> +                       interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
> +                       clocks = <&uart_clk>;
> +               };
> +
> +               uart3: serial at 11005000 {
> +                       compatible = "mediatek,mt8173-uart","mediatek,mt6577-uart";
> +                       reg = <0 0x11005000 0 0x400>;
> +                       interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
> +                       clocks = <&uart_clk>;
> +               };
> +       };
> +
> +};
> +
> --
> 1.8.1.1
>
> ************* Email Confidentiality Notice ********************
> The information contained in this e-mail message (including any
> attachments) may be confidential, proprietary, privileged, or otherwise
> exempt from disclosure under applicable laws. It is intended to be
> conveyed only to the designated recipient(s). Any use, dissemination,
> distribution, printing, retaining or copying of this e-mail (including its
> attachments) by unintended recipient(s) is strictly prohibited and may
> be unlawful. If you are not an intended recipient of this e-mail, or believe
> that you have received this e-mail in error, please notify the sender
> immediately (by replying to this e-mail), delete any and all copies of
> this e-mail (including any attachments) from your system, and do not
> disclose the content of this e-mail to any other person. Thank you!



-- 
motzblog.wordpress.com



More information about the linux-arm-kernel mailing list