[PATCH v2 4/8] irqchip: devicetree: document Conexant Digicolor irq binding
Baruch Siach
baruch at tkos.co.il
Sun Jan 11 03:29:44 PST 2015
Hi Sergei,
On Fri, Jan 09, 2015 at 06:12:44PM +0300, Sergei Shtylyov wrote:
> On 1/8/2015 10:40 PM, Baruch Siach wrote:
>
> >Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> >---
> > .../bindings/interrupt-controller/digicolor-ic.txt | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
>
> >diff --git a/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
> >new file mode 100644
> >index 000000000000..fdf9a4c59bf3
> >--- /dev/null
> >+++ b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
> >@@ -0,0 +1,20 @@
> >+Conexant Digicolor Interrupt Controller
> >+
> >+Required properties:
> >+
> >+- compatible : should be "cnxt,cx92755-ic"
> >+- reg : Specifies base physical address and size of the MISC area, that is
> >+ where the interrupt controller registers are located
> >+- interrupt-controller : Identifies the node as an interrupt controller
> >+- #interrupt-cells : Specifies the number of cells needed to encode an
> >+ interrupt source. The value shall be 1.
> >+
> >+Example:
> >+
> >+ intc: intc at f0000000 {
>
> The node name should be "interrupt-controller at f0000000", according to the
> ePAPR standard, section 2.2.2.
I'll change that in my next submission.
Thanks,
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
More information about the linux-arm-kernel
mailing list