[Bugfix] x86/apic: Fix xen IRQ allocation failure caused by commit b81975eade8c
Sander Eikelenboom
linux at eikelenboom.it
Sat Jan 10 11:12:02 PST 2015
Wednesday, January 7, 2015, 7:13:49 AM, you wrote:
> Commit b81975eade8c ("x86, irq: Clean up irqdomain transition code")
> breaks xen IRQ allocation because xen_smp_prepare_cpus() doesn't invoke
> setup_IO_APIC(), so no irqdomains created for IOAPICs and
> mp_map_pin_to_irq() fails at the very beginning.
> Enhance xen_smp_prepare_cpus() to call setup_IO_APIC() to initialize
> irqdomain for IOAPICs.
> Signed-off-by: Jiang Liu <jiang.liu at linux.intel.com>
> Reported-and-tested-by: Sander Eikelenboom <linux at eikelenboom.it>
> Cc: Konrad Rzeszutek Wilk <konrad.wilk at oracle.com>
> ---
> Hi all,
> This patch should be backported to v3.17, but there are
> conflicts. So I will send backported patch to 3.17/3.18 stable tree
> once this patch has been merged into mainstream kernel.
> Thanks!
> Gerry
Hi Gerry / Konrad / Thomas,
This patch doesn't apply cleanly to current linux-tip.
Unfortunately the "Tested-by" seems only valid for the intel hardware i have (intel NUC).
Testing on AMD delivered some interesting results:
- Under Xen: Host freeze early in dom0 kernel boot, unfortunately no more info.
- On baremetal with iommu enabled and ivrs_ioapic[6]=00:14.0 ivrs_hpet[0]=00:14.0
as commandline override for a borked bios:
It doesn't boot and spits out:
[ 0.339811] AMD-Vi: Command-line override present for HPET id 0 - ignoring
[ 0.460563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.511535] Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC
[ 0.537042] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc3-20150110-pciback-doflr-apic-fixed+ #1
[ 0.564887] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 0.588558] ffff88054b00c000 ffff880547d8fda8 ffffffff81bb3fc9 ffff880547db0000
[ 0.610722] ffffffff81f20070 ffff880547d8fe28 ffffffff81baeeb9 ffff880547d8fde8
[ 0.632886] ffffffff00000008 ffff880547d8fe38 ffff880547d8fdd8 00000000fffea093
[ 0.655052] Call Trace:
[ 0.662349] [<ffffffff81bb3fc9>] dump_stack+0x45/0x57
[ 0.677712] [<ffffffff81baeeb9>] panic+0xcd/0x212
[ 0.692026] [<ffffffff81583187>] panic_if_irq_remap+0x17/0x20
[ 0.709460] [<ffffffff8233c634>] setup_IO_APIC+0x2bb/0x74c
[ 0.726112] [<ffffffff8233a04a>] native_smp_prepare_cpus+0x2c9/0x35a
[ 0.745365] [<ffffffff82328200>] kernel_init_freeable+0x153/0x298
[ 0.763839] [<ffffffff81baa589>] ? kernel_init+0x9/0xf0
[ 0.779712] [<ffffffff810e82bb>] ? finish_task_switch+0x8b/0x100
[ 0.797937] [<ffffffff81baa580>] ? rest_init+0xc0/0xc0
[ 0.813549] [<ffffffff81baa589>] kernel_init+0x9/0xf0
[ 0.828904] [<ffffffff81bbf8bc>] ret_from_fork+0x7c/0xb0
[ 0.845036] [<ffffffff81baa580>] ? rest_init+0xc0/0xc0
[ 0.860660] ---[ end Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC
- On baremetal with iommu enabled and without the commandline overrides:
It boots, but iommu is disabled (as expected) but i also get this lockdep trace:
[ 0.339808] [Firmware Bug]: AMD-Vi: IOAPIC[6] not in IVRS table
[ 0.357519] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
[ 0.375220] AMD-Vi: Disabling interrupt remapping
[ 0.389723] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.440685] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.458128] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.476602] ..... (found apic 0 pin 2) ...
[ 0.488834] ------------[ cut here ]------------
[ 0.502631] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2744 lockdep_trace_alloc+0x12c/0x140()
[ 0.530215] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
[ 0.546347] Modules linked in:
[ 0.556006] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc3-20150110-pciback-doflr-apic-fixed+ #1
[ 0.583839] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 0.607512] ffffffff81f2408e ffff880547d8fcd8 ffffffff81bb3fc9 ffff880547db0000
[ 0.629675] ffff880547d8fd28 ffff880547d8fd18 ffffffff810c738d ffff880547d8fd08
[ 0.651840] ffff880547db0000 0000000000000086 0000000000000080 0000000000000000
[ 0.674004] Call Trace:
[ 0.681302] [<ffffffff81bb3fc9>] dump_stack+0x45/0x57
[ 0.696653] [<ffffffff810c738d>] warn_slowpath_common+0x8d/0xd0
[ 0.714605] [<ffffffff810c7471>] warn_slowpath_fmt+0x41/0x50
[ 0.731780] [<ffffffff8110e2c2>] ? vprintk_emit+0x312/0x5f0
[ 0.748692] [<ffffffff8110229c>] lockdep_trace_alloc+0x12c/0x140
[ 0.766906] [<ffffffff811b5a9f>] kmem_cache_alloc_node+0x3f/0x160
[ 0.785379] [<ffffffff8104573c>] ? __add_pin_to_irq_node+0x6c/0xc0
[ 0.804112] [<ffffffff8104573c>] __add_pin_to_irq_node+0x6c/0xc0
[ 0.822326] [<ffffffff8233c6c8>] setup_IO_APIC+0x34f/0x74c
[ 0.838990] [<ffffffff8233a04a>] native_smp_prepare_cpus+0x2c9/0x35a
[ 0.858243] [<ffffffff82328200>] kernel_init_freeable+0x153/0x298
[ 0.876719] [<ffffffff81baa589>] ? kernel_init+0x9/0xf0
[ 0.892602] [<ffffffff810e82bb>] ? finish_task_switch+0x8b/0x100
[ 0.910815] [<ffffffff81baa580>] ? rest_init+0xc0/0xc0
[ 0.926428] [<ffffffff81baa589>] kernel_init+0x9/0xf0
[ 0.941782] [<ffffffff81bbf8bc>] ret_from_fork+0x7c/0xb0
[ 0.957913] [<ffffffff81baa580>] ? rest_init+0xc0/0xc0
[ 0.973531] ---[ end trace 5f14749f8239057a ]---
[ 1.020338] ....... works.
Without this patch applied i don't see these issues (with or without the
override).
.config and dmesg of a baremetal boot without the commandline override is attached.
--
Sander
> ---
> arch/x86/include/asm/io_apic.h | 2 +-
> arch/x86/include/asm/smpboot_hooks.h | 5 ++---
> arch/x86/kernel/apic/apic.c | 5 ++---
> arch/x86/kernel/apic/io_apic.c | 32 +++++++++++++++-----------------
> arch/x86/xen/smp.c | 3 +++
> 5 files changed, 23 insertions(+), 24 deletions(-)
> diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
> index bf006cce9418..72a1298658bb 100644
> --- a/arch/x86/include/asm/io_apic.h
> +++ b/arch/x86/include/asm/io_apic.h
> @@ -237,7 +237,7 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
>
> extern void io_apic_eoi(unsigned int apic, unsigned int vector);
>
> -extern void setup_IO_APIC(void);
> +extern void setup_IO_APIC(bool xen_smp);
> extern void enable_IO_APIC(void);
> extern void disable_IO_APIC(void);
> extern void setup_ioapic_dest(void);
> diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h
> index 0da7409f0bec..e47df710a588 100644
> --- a/arch/x86/include/asm/smpboot_hooks.h
> +++ b/arch/x86/include/asm/smpboot_hooks.h
> @@ -53,10 +53,9 @@ static inline void __init smpboot_setup_io_apic(void)
> * go and set it up:
> */
> if (!skip_ioapic_setup && nr_ioapics)
> - setup_IO_APIC();
> - else {
> + setup_IO_APIC(false);
> + else
> nr_ioapics = 0;
> - }
> #endif
> }
>
> diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
> index 29b5b18afa27..71b8a6cb7f0e 100644
> --- a/arch/x86/kernel/apic/apic.c
> +++ b/arch/x86/kernel/apic/apic.c
> @@ -1913,10 +1913,9 @@ int __init APIC_init_uniprocessor(void)
>
> #ifdef CONFIG_X86_IO_APIC
> if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
> - setup_IO_APIC();
> - else {
> + setup_IO_APIC(false);
> + else
> nr_ioapics = 0;
> - }
> #endif
>
> x86_init.timers.setup_percpu_clockev();
> diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
> index 3f5f60406ab1..13cddc75e4c0 100644
> --- a/arch/x86/kernel/apic/io_apic.c
> +++ b/arch/x86/kernel/apic/io_apic.c
> @@ -2369,31 +2369,29 @@ static void ioapic_destroy_irqdomain(int idx)
> ioapics[idx].pin_info = NULL;
> }
>
> -void __init setup_IO_APIC(void)
> +void __init setup_IO_APIC(bool xen_smp)
> {
> int ioapic;
>
> - /*
> - * calling enable_IO_APIC() is moved to setup_local_APIC for BP
> - */
> - io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL;
> + if (!xen_smp) {
> + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
> + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL;
> +
> + /* Set up IO-APIC IRQ routing. */
> + x86_init.mpparse.setup_ioapic_ids();
> + sync_Arb_IDs();
> + }
>
> - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
> for_each_ioapic(ioapic)
> BUG_ON(mp_irqdomain_create(ioapic));
> -
> - /*
> - * Set up IO-APIC IRQ routing.
> - */
> - x86_init.mpparse.setup_ioapic_ids();
> -
> - sync_Arb_IDs();
> setup_IO_APIC_irqs();
> - init_IO_APIC_traps();
> - if (nr_legacy_irqs())
> - check_timer();
> -
> ioapic_initialized = 1;
> +
> + if (!xen_smp) {
> + init_IO_APIC_traps();
> + if (nr_legacy_irqs())
> + check_timer();
> + }
> }
>
> /*
> diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
> index 4c071aeb8417..7eb0283901fa 100644
> --- a/arch/x86/xen/smp.c
> +++ b/arch/x86/xen/smp.c
> @@ -326,7 +326,10 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
>
> xen_raw_printk(m);
> panic(m);
> + } else {
> + setup_IO_APIC(true);
> }
> +
> xen_init_lock_cpu(0);
>
> smp_store_boot_cpu_info();
More information about the linux-arm-kernel
mailing list