[PATCH v2 08/21] irqchip: crossbar: convert dra7 crossbar to stacked domains

[Marc Zyngier]

On 2015-01-08 14:39, Nishanth Menon wrote:
> On 17:42-20150107, Marc Zyngier wrote:
> [..]
>> diff --git a/arch/arm/boot/dts/dra7-evm.dts 
>> b/arch/arm/boot/dts/dra7-evm.dts
>> index 10b725c..048cfeb 100644
>> --- a/arch/arm/boot/dts/dra7-evm.dts
>> +++ b/arch/arm/boot/dts/dra7-evm.dts
>> @@ -423,7 +423,7 @@
>>  	status = "okay";
>>  	pinctrl-names = "default";
>>  	pinctrl-0 = <&uart1_pins>;
>> -	interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
>> +	interrupts-extended = <&crossbar_mpu GIC_SPI 67 
>> IRQ_TYPE_LEVEL_HIGH>,
>>  			      <&dra7_pmx_core 0x3e0>;
> ^^ interrrupt-extended for uart1 here
> [..]
>
>> diff --git a/arch/arm/boot/dts/dra7.dtsi 
>> b/arch/arm/boot/dts/dra7.dtsi
> [...]
>> @@ -344,7 +344,7 @@
>>  		uart1: serial at 4806a000 {
>>  			compatible = "ti,omap4-uart";
>>  			reg = <0x4806a000 0x100>;
>> -			interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> ^^ implies we will have both interrupts and interrupts-extended
> properties for uart1 in dra7-evm.dtb
>
> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> does not make it clear as to what the priority will be when both
> properties are present.

Yup, good call. I don't think it matters (interrupts inherits the 
implicit irq-parent, but consistency is good.

> [...]
> Also, for 3.19-rc3, Missing the following causing x15 to fail boot.
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 49edbda68cd5..c2241c2e5d9d 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -335,7 +335,6 @@
>  	mcp_rtc: rtc at 6f {
>  		compatible = "microchip,mcp7941x";
>  		reg = <0x6f>;
> -		interrupt-parent = <&gic>;
>  		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>;  /* IRQ_SYS_1N */
>
>  		pinctrl-names = "default";
> @@ -358,7 +357,7 @@
>
>  &uart3 {
>  	status = "okay";
> -	interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> +	interrupts-extended = <&crossbar_mpu GIC_SPI 69 
> IRQ_TYPE_LEVEL_HIGH>,
>  			      <&dra7_pmx_core 0x248>;
>
>  	pinctrl-names = "default";

Ah, thanks for the patch, I've folded this in.

Thanks,

         M.
-- 
Fast, cheap, reliable. Pick two.