[PATCH 4/4] ARM: shmobile: kzm9g-reference: Remove board C code and DT file
Geert Uytterhoeven
geert+renesas at glider.be
Fri Jan 9 05:13:56 PST 2015
Now that the sh73a0 generic multiplatform case has the same feature set
as the kzm9g DT reference board code, we get rid of the latter.
DT reference code in the future shall make use of the sh73a0
multiplatform support code with the generic SoC machine vector.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 -
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 398 ---------------------
arch/arm/mach-shmobile/Kconfig | 14 -
arch/arm/mach-shmobile/Makefile | 1 -
arch/arm/mach-shmobile/Makefile.boot | 1 -
arch/arm/mach-shmobile/board-kzm9g-reference.c | 62 ----
arch/arm/mach-shmobile/include/mach/zboot.h | 2 +-
8 files changed, 2 insertions(+), 481 deletions(-)
delete mode 100644 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
delete mode 100644 arch/arm/mach-shmobile/board-kzm9g-reference.c
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 51147cb5c036599a..c69f127d27c3b974 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -57,8 +57,6 @@ Boards:
compatible = "renesas,kzm9d", "renesas,emev2"
- Kyoto Microcomputer Co. KZM-A9-GT
compatible = "renesas,kzm9g", "renesas,sh73a0"
- - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation
- compatible = "renesas,kzm9g-reference", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790"
- Mackerel (R0P7372LC0016RL, AP4 EVM 2nd)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 52844bf64d22cc8c..be6e2607da889bf6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -411,8 +411,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
r8a7778-bockw-reference.dtb \
r8a7779-marzen.dtb \
sh7372-mackerel.dtb \
- sh73a0-kzm9g.dtb \
- sh73a0-kzm9g-reference.dtb
+ sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a73a4-ape6evm.dtb \
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
deleted file mode 100644
index bf365f7fef47213a..0000000000000000
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Horms Solutions Ltd.
- *
- * Based on sh73a0-kzm9g.dts
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh73a0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "KZM-A9-GT";
- compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
-
- aliases {
- serial4 = &scifa4;
- };
-
- cpus {
- cpu at 0 {
- cpu0-supply = <&vdd_dvfs>;
- operating-points = <
- /* kHz uV */
- 1196000 1315000
- 598000 1175000
- 398667 1065000
- >;
- voltage-tolerance = <1>; /* 1% */
- };
- };
-
- chosen {
- bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
- stdout-path = &scifa4;
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x20000000>;
- };
-
- reg_1p8v: regulator at 0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- reg_3p3v: regulator at 1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vmmc_sdhi0: regulator at 2 {
- compatible = "regulator-fixed";
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vmmc_sdhi2: regulator at 3 {
- compatible = "regulator-fixed";
- regulator-name = "SDHI2 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- lan9220 at 10000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x10000000 0x100>;
- phy-mode = "mii";
- interrupt-parent = <&irqpin0>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- reg-io-width = <4>;
- smsc,irq-push-pull;
- smsc,save-mac-address;
- vddvario-supply = <®_1p8v>;
- vdd33a-supply = <®_3p3v>;
- };
-
- leds {
- compatible = "gpio-leds";
- led1 {
- gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
- label = "LED1";
- };
- led2 {
- gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
- label = "LED2";
- };
- led3 {
- gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
- label = "LED3";
- };
- led4 {
- gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
- label = "LED4";
- };
- };
-
- keyboard {
- compatible = "gpio-keys";
-
- back-key {
- gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_BACK>;
- label = "SW3";
- };
-
- right-key {
- gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RIGHT>;
- label = "SW2-R";
- };
-
- left-key {
- gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_LEFT>;
- label = "SW2-L";
- };
-
- enter-key {
- gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_ENTER>;
- label = "SW2-P";
- };
-
- up-key {
- gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_UP>;
- label = "SW2-U";
- };
-
- down-key {
- gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_DOWN>;
- label = "SW2-D";
- };
-
- home-key {
- gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_HOME>;
- label = "SW1";
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "left_j";
- simple-audio-card,cpu {
- sound-dai = <&sh_fsi2 0>;
- };
- simple-audio-card,codec {
- sound-dai = <&ak4648>;
- bitclock-master;
- frame-master;
- system-clock-frequency = <11289600>;
- };
- };
-};
-
-&cmt1 {
- status = "okay";
-};
-
-&extal2_clk {
- clock-frequency = <48000000>;
-};
-
-&i2c0 {
- status = "okay";
-
- compass at c {
- compatible = "asahi-kasei,ak8975";
- reg = <0x0c>;
- interrupt-parent = <&irqpin3>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- };
-
- ak4648: codec at 12 {
- compatible = "asahi-kasei,ak4648";
- reg = <0x12>;
- #sound-dai-cells = <0>;
- };
-
- accelerometer at 1d {
- compatible = "adi,adxl34x";
- reg = <0x1d>;
- interrupt-parent = <&irqpin3>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
- <3 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- rtc at 32 {
- compatible = "ricoh,r2025sd";
- reg = <0x32>;
- };
-
- as3711 at 40 {
- compatible = "ams,as3711";
- reg = <0x40>;
-
- regulators {
- vdd_dvfs: sd1 {
- regulator-name = "1.315V CPU";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
- sd2 {
- regulator-name = "1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- sd4 {
- regulator-name = "1.215V";
- regulator-min-microvolt = <1215000>;
- regulator-max-microvolt = <1235000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo2 {
- regulator-name = "2.8V CPU";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo3 {
- regulator-name = "3.0V CPU";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo4 {
- regulator-name = "2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo5 {
- regulator-name = "2.8V #2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo7 {
- regulator-name = "1.15V CPU";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo8 {
- regulator-name = "1.15V CPU #2";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-
- touchscreen at 55 {
- compatible = "sitronix,st1232";
- reg = <0x55>;
- interrupt-parent = <&irqpin1>;
- interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- };
-};
-
-&i2c3 {
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- pcf8575: gpio at 20 {
- compatible = "nxp,pcf8575";
- reg = <0x20>;
- interrupt-parent = <&irqpin2>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-};
-
-&mmcif {
- pinctrl-0 = <&mmcif_pins>;
- pinctrl-names = "default";
-
- bus-width = <8>;
- vmmc-supply = <®_1p8v>;
- status = "okay";
-};
-
-&pfc {
- i2c3_pins: i2c3 {
- renesas,groups = "i2c3_1";
- renesas,function = "i2c3";
- };
-
- mmcif_pins: mmc {
- mux {
- renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
- renesas,function = "mmc0";
- };
- cfg {
- renesas,groups = "mmc0_data8_0";
- renesas,pins = "PORT279";
- bias-pull-up;
- };
- };
-
- scifa4_pins: serial4 {
- renesas,groups = "scifa4_data", "scifa4_ctrl";
- renesas,function = "scifa4";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
- renesas,function = "sdhi0";
- };
-
- sdhi2_pins: sd2 {
- renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
- renesas,function = "sdhi2";
- };
-
- fsia_pins: sounda {
- renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
- "fsia_data_in", "fsia_data_out";
- renesas,function = "fsia";
- };
-};
-
-&scifa4 {
- pinctrl-0 = <&scifa4_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vmmc_sdhi0>;
- bus-width = <4>;
- status = "okay";
-};
-
-&sdhi2 {
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vmmc_sdhi2>;
- bus-width = <4>;
- broken-cd;
- status = "okay";
-};
-
-&sh_fsi2 {
- pinctrl-0 = <&fsia_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 8ee2f281f2a3dd6a..f4108d85c03c6a0e 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -214,20 +214,6 @@ config MACH_KZM9G
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
-config MACH_KZM9G_REFERENCE
- bool "KZM-A9-GT board - Reference Device Tree Implementation"
- depends on ARCH_SH73A0
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select USE_OF
- ---help---
- Use reference implementation of KZM-A9-GT board support
- which makes as greater use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
comment "Renesas ARM SoCs System Configuration"
config CPU_HAS_INTEVT
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index b400f5fe72c269af..7b9ed9e25e9bc954 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o
-obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
# Framework support
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 02532bea530000cb..6ef0e2b29a02440d 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -6,7 +6,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
-loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
deleted file mode 100644
index 2e82e44ab85258b7..0000000000000000
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * KZM-A9-GT board support - Reference Device Tree Implementation
- *
- * Copyright (C) 2012 Horms Solutions Ltd.
- *
- * Based on board-kzm9g.c
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/of_platform.h>
-
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "sh73a0.h"
-
-static void __init kzm_init(void)
-{
- sh73a0_add_standard_devices_dt();
-
-#ifdef CONFIG_CACHE_L2X0
- /* Shared attribute override enable, 64K*8way */
- l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
-{
- /* Do soft power on reset */
- writel((1 << 31), RESCNT2);
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
- "renesas,kzm9g-reference",
- NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
- .smp = smp_ops(sh73a0_smp_ops),
- .map_io = sh73a0_map_io,
- .init_early = shmobile_init_delay,
- .init_machine = kzm_init,
- .init_late = shmobile_init_late,
- .restart = kzm9g_restart,
- .dt_compat = kzm9g_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index 727cc78ac8ece937..219bbcf029cc34b0 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -12,7 +12,7 @@
#ifdef CONFIG_MACH_MACKEREL
#define MEMORY_START 0x40000000
#include "mach/head-mackerel.txt"
-#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE)
+#elif defined(CONFIG_MACH_KZM9G)
#define MEMORY_START 0x43000000
#include "mach/head-kzm9g.txt"
#else
--
1.9.1
More information about the linux-arm-kernel
mailing list