[PATCH 5/9] dts: versatile: add sysregs nodes

[Linus Walleij]

On Tue, Dec 30, 2014 at 8:28 PM, Rob Herring <robherring2 at gmail.com> wrote:

> From: Rob Herring <robh at kernel.org>
>
> The Versatile boards have the same sysregs as other ARM Ltd boards. Add
> the nodes in preparation to enable support for 24MHz counter as
> sched_clock and MMC card detect and write protect support.
>
> Signed-off-by: Rob Herring <robh at kernel.org>
> Cc: Russell King <linux at arm.linux.org.uk>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> ---
>  arch/arm/boot/dts/versatile-ab.dts | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
> index 27d0d9c..62f04b0 100644
> --- a/arch/arm/boot/dts/versatile-ab.dts
> +++ b/arch/arm/boot/dts/versatile-ab.dts
> @@ -252,6 +252,29 @@
>                         #size-cells = <1>;
>                         ranges = <0 0x10000000 0x10000>;
>
> +                       sysreg at 0 {
> +                               compatible = "arm,vexpress-sysreg";

vexpress? No...

compatible = "syscon";


> +                               reg = <0x00000 0x1000>;
> +
> +                               v2m_led_gpios: sys_led at 08 {
> +                                       compatible = "arm,vexpress-sysreg,sys_led";
> +                                       gpio-controller;
> +                                       #gpio-cells = <2>;
> +                               };

These are not GPIOs. These are LED registers really.
see how to use LEDs from drivers/leds/leds-syscon.c and bindings.
example in:
arch/arm/boot/dts/integrator.dtsi

Very straight-forward I think.

> +
> +                               v2m_mmc_gpios: sys_mci at 48 {
> +                                       compatible = "arm,vexpress-sysreg,sys_mci";
> +                                       gpio-controller;
> +                                       #gpio-cells = <2>;
> +                               };
> +
> +                               v2m_flash_gpios: sys_flash at 4c {
> +                                       compatible = "arm,vexpress-sysreg,sys_flash";
> +                                       gpio-controller;
> +                                       #gpio-cells = <2>;
> +                               };

I don't have drivers for these "gpio controllers" and I don't think they are
GPIOs either, since they are not general purpose at all.

For the latter I have some code boiling for the Integrators:
https://git.kernel.org/cgit/linux/kernel/git/linusw/linux-integrator.git/commit/?h=multiplatform&id=9c28e114ec957fadf1dade382d8e8b8aa43c8426
https://git.kernel.org/cgit/linux/kernel/git/linusw/linux-integrator.git/commit/?h=multiplatform&id=a3d4512abb85de290cdca0586bcff9147833917f

Yours,
Linus Walleij