ARM: dts: sunxi: A20-OlinuXino-Lime2 raise dcdc2 lower voltage limit

[Iain Paton]

The Lime2 is not stable if the cpu core voltage is reduced below 1v. To
prevent any problems when operating points are enabled, raise the pmic dcdc2
lower voltage limit to 1v.

Signed-off-by: Iain Paton <ipaton0 at gmail.com>
---

Maxime, I realise the axp209 nodes will probably end up abstracted somewhat 
differently once all of the patches Chen-Yu posted are reviewed and picked
up and I can redo the lime2 dts to fit once that's done.
For now, the lime2 dts defines the full axp209 node itself including all of
the regulators, so if the lowest opp with the 0.9v setting is enabled this 
will cause problems.

Up to you if you want to take this patch now or we wait until the axp209.dtsi
lands and refactor the lime2 dts appropriately then.

 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index ed364d5..910318a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -159,7 +159,7 @@
 					};
 
 					vdd_cpu: dcdc2 {
-						regulator-min-microvolt = <700000>;
+						regulator-min-microvolt = <1000000>;
 						regulator-max-microvolt = <2275000>;
 						regulator-always-on;
 					};
-- 
2.1.3