[PATCH v2] ARM: dts: add bcm2835-pwm bindings

[Bart Tanghe]

To probe the bcm2835-pwm driver properly, this dts bindings has to be added 
to the bcm2835 dtsi file.
In expectation of a bcm2835 clock driver, I've added fixed-clock clock binding.
---
Changes in v2:
 - status set to disabled
 - follow the clock naming convention

Signed-off-by: Bart Tanghe <bart.tanghe at thomasmore.be>

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 3342cb1..ba76bb4 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -146,6 +147,14 @@
 			interrupts = <1 9>;
 		};
 
+		pwm: pwm at 7e20e000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clk_pwm>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		arm-pmu {
 			compatible = "arm,arm1176-pmu";
 		};
@@ -179,5 +188,13 @@
 			clock-output-names = "spi";
 			clock-frequency = <250000000>;
 		};
+
+		clk_pwm: clock at 3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-output-names = "pwm";
+			clock-frequency = <9200000>;
+		};
 	};
 };