[PATCH v2 6/7] ARM: mvebu: Add a number of pinctrl functions
Gregory CLEMENT
gregory.clement at free-electrons.com
Tue Jan 6 13:25:40 PST 2015
Hi Maxime,
On 06/01/2015 16:28, Maxime Ripard wrote:
> Some pinctrl functions can be shared with all DTS out there, since they are
> generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid
> duplication.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-38x.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 40200084c6c8..98885c58be29 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -195,6 +195,45 @@
>
> pinctrl at 18000 {
> reg = <0x18000 0x20>;
> +
> + ge0_rgmii_pins: ge-rgmii-pins-0 {
> + marvell,pins = "mpp6", "mpp7", "mpp8",
> + "mpp9", "mpp10", "mpp11",
> + "mpp12", "mpp13", "mpp14",
> + "mpp15", "mpp16", "mpp17";
> + marvell,function = "ge0";
> + };
> +
> + i2c0_pins: i2c-pins-0 {
> + marvell,pins = "mpp2", "mpp3";
> + marvell,function = "i2c0";
> + };
> +
> + mdio_pins: mdio-pins {
> + marvell,pins = "mpp4", "mpp5";
> + marvell,function = "ge";
> + };
> +
> + ref_clk0_pins: ref-clk-pins-0 {
> + marvell,pins = "mpp45";
> + marvell,function = "ref";
> + };
> +
> + spi1_pins: spi-pins-1 {
> + marvell,pins = "mpp56", "mpp57", "mpp58",
> + "mpp59";
> + marvell,function = "spi1";
> + };
> +
> + uart0_pins: uart-pins-0 {
> + marvell,pins = "mpp0", "mpp1";
> + marvell,function = "ua0";
> + };
> +
> + uart1_pins: uart-pins-1 {
> + marvell,pins = "mpp19", "mpp20";
> + marvell,function = "ua1";
> + };
> };
>
> gpio0: gpio at 18100 {
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list