[PATCH 08/17] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes
Maxime Ripard
maxime.ripard at free-electrons.com
Tue Jan 6 08:11:02 PST 2015
Hi,
On Tue, Jan 06, 2015 at 10:35:18AM +0800, Chen-Yu Tsai wrote:
> This patch adds the regulator nodes for the axp209 by including
> the axp209 dtsi. As the inputs of these regulators are from the
> axp209's PS output, which is basically just a mux over the 2
> inputs, it is considered to be unregulated. Thus we do not provide
> input supply properties for them.
>
> The regulator names and constraints are based on the board
> schematics and the SoC datasheet.
>
> DCDC2 is used as the cpu power supply. This patch also references
> it from the cpu node.
>
> Also get rid of axp209 properties already set in axp209.dtsi.
>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
> arch/arm/boot/dts/axp209.dtsi | 4 ++++
> arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 35 +++++++++++++++++++++++++----
> 2 files changed, 35 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
> index 3c38cbafe285..fec3364b2110 100644
> --- a/arch/arm/boot/dts/axp209.dtsi
> +++ b/arch/arm/boot/dts/axp209.dtsi
> @@ -54,6 +54,10 @@
> */
>
> &axp209 {
> + compatible = "x-powers,axp209";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
This should be in your patch adding the AXP DTSI.
> regulators {
> /* Default work frequency for buck regulators */
> x-powers,dcdc-freq = <1500>;
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> index 53680983461a..61e61c0eb829 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> @@ -84,13 +84,9 @@
> status = "okay";
>
> axp209: pmic at 34 {
> - compatible = "x-powers,axp209";
> reg = <0x34>;
> interrupt-parent = <&nmi_intc>;
> interrupts = <0 8>;
> -
> - interrupt-controller;
> - #interrupt-cells = <1>;
> };
> };
>
> @@ -141,3 +137,34 @@
> status = "okay";
> };
> };
> +
> +/include/ "axp209.dtsi"
We've switched to preprocessor includes, please use them instead.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150106/c2eb17ee/attachment.sig>
More information about the linux-arm-kernel
mailing list