[PATCH 1/4] ARM: tegra: rely on bootloader pinmux programming on nyan-big

[Tomeu Vizoso]

Following 6dbaff2b, the kernel expects that the bootloader has correctly
programmed the Tegra pinmux.

DTs for the Jetson and the Venice2 had been updated already but this one
was left behind.

Have tested this with the stock vendor firmware (coreboot) and have found no
issues.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso at collabora.com>
---
 arch/arm/boot/dts/tegra124-nyan-big.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index 53181d3..4752572 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -44,10 +44,10 @@
 	};
 
 	pinmux at 0,70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_default>;
+		pinctrl-names = "boot";
+		pinctrl-0 = <&pinmux_boot>;
 
-		pinmux_default: common {
+		pinmux_boot: common {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
-- 
1.9.3