[PATCH v11 0/9] Enable L2 cache support on Exynos4210/4x12 SoCs
Nishanth Menon
nm at ti.com
Mon Jan 5 09:00:40 PST 2015
On 01/05/2015 06:18 AM, Marek Szyprowski wrote:
> This is an updated patchset, which intends to add support for L2 cache
> on Exynos4 SoCs on boards running under secure firmware, which requires
> certain initialization steps to be done with help of firmware, as
> selected registers are writable only from secure mode.
>
> First patch updates Omap2+ platforms by moving l2cache initialization to
> common code. This will resolve too early call to l2cache init, what might
> cause kmalloc failure in code added in next patches.
>
> Next patch fixes access method to latency and filter settings in l2cache
> driver.
>
> Next four patches extend existing support for secure write in L2C driver
> to account for design of secure firmware running on Exynos. Namely:
> 1) direct read access to certain registers is needed on Exynos, because
> secure firmware calls set several registers at once,
> 2) not all boards are running secure firmware, so .write_sec callback
> needs to be installed in Exynos firmware ops initialization code,
> 3) write access to {DATA,TAG}_LATENCY_CTRL registers fron non-secure world
> is not allowed and so must use l2c_write_sec as well,
> 4) on certain boards, default value of prefetch register is incorrect
> and must be overridden at L2C initialization.
> For boards running with firmware that provides access to individual
> L2C registers this series should introduce no functional changes. However
> since the driver is widely used on other platforms I'd like to kindly ask
> any interested people for testing.
>
> Further three patches add implementation of .write_sec and .configure
> callbacks for Exynos secure firmware and necessary DT nodes to enable
> L2 cache.
>
> Changes in this version tested on Exynos4412-based TRATS2 and OdroidU3+
> boards (both with secure firmware). There should be no functional change
> for Exynos boards running without secure firmware. I do not have access
> to affected non-Exynos boards, so I could not test on them.
>
> Depends on:
> - v3.19-rc2
>
> Changelog:
>
> Changes since v10:
> (https://lkml.org/lkml/2014/12/23/151)
> - Added patch, which fixes access method to latency and filter settings
> in l2cache
>
> Changes since v9:
> (https://lkml.org/lkml/2014/11/17/217)
> - Rebased onto vanilla v3.19-rc1
> - Added patch for Omap2+ (move l2cache initialization to common code), what
> fixes too early initialization (kmalloc failure)
>
> Changes since v8:
> (http://lkml.org/lkml/2014/11/13/263)
> - Rebased onto vanilla v3.18-rc3 and added required includes, which were
> previously added by other patches
> - Added Acked-by tags for Exynos part
>
> Changes since v7:
> (https://lkml.org/lkml/2014/10/29/158)
> - rebased onto arm-soc/for-next kernel tree (depends on patches merged to
> v3.18-rc3 and arm-soc/samsung/pm2 branch)
> - removed 'ARM: l2c: unify L2C-310 OF initialization error messages' patch
> (no longer needed)
>
> Changes since v6:
> (https://lkml.org/lkml/2014/10/27/233)
> - changed PL310 to L2C-310 prefix in error messages
> - added patch shortening the error message about incorrect associativity
>
> Changes since v5:
> (https://lkml.org/lkml/2014/9/24/364)
> - rebased onto v3.18-rc2
> - added error message about missing properties values
>
> Changes since v4:
> (https://lkml.org/lkml/2014/8/26/461)
> - rewrote the code accessing l2x0_saved_regs from assembly code
> - added comment and reworked unconditional call to SMC_CMD_L2X0INVALL
>
>
> Patch summary:
>
> Marek Szyprowski (2):
> ARM: OMAP2+: use common l2cache initialization code
> ARM: l2c: use l2c_write_sec() for restoring latency and filter regs
>
> Tomasz Figa (7):
> ARM: l2c: Refactor the driver to use commit-like interface
> ARM: l2c: Add interface to ask hypervisor to configure L2C
> ARM: l2c: Get outer cache .write_sec callback from mach_desc only if
> not NULL
> ARM: l2c: Add support for overriding prefetch settings
> ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310
> ARM: EXYNOS: Add support for non-secure L2X0 resume
> ARM: dts: exynos4: Add nodes for L2 cache controller
>
> Documentation/devicetree/bindings/arm/l2cc.txt | 10 +
> arch/arm/boot/dts/exynos4210.dtsi | 9 +
> arch/arm/boot/dts/exynos4x12.dtsi | 14 ++
> arch/arm/include/asm/outercache.h | 3 +
> arch/arm/kernel/irq.c | 3 +-
> arch/arm/mach-exynos/firmware.c | 50 +++++
> arch/arm/mach-exynos/sleep.S | 46 +++++
> arch/arm/mach-omap2/board-generic.c | 6 +
> arch/arm/mach-omap2/common.h | 7 +
> arch/arm/mach-omap2/omap4-common.c | 16 +-
> arch/arm/mm/cache-l2x0.c | 270 ++++++++++++++++---------
> 11 files changed, 323 insertions(+), 111 deletions(-)
>
Applied all 9 patches and tested on as many boards as I could get my
hands on.. all boot fine, Thanks
1: am335x-evm: BOOT: PASS: http://slexy.org/raw/s21Q8Zw33s
2: am335x-sk: BOOT: PASS: http://slexy.org/raw/s28O0bBEyM
3: am437x-sk: BOOT: PASS: http://slexy.org/raw/s203dOrLId
4: am43xx-epos: BOOT: PASS: http://slexy.org/raw/s2uWmV1XkM
5: am43xx-gpevm: BOOT: PASS: http://slexy.org/raw/s20jVsjU00
6: BeagleBoard-X15(am57xx-evm): BOOT: PASS:
http://slexy.org/raw/s21ezwoOop
7: BeagleBoard-XM: BOOT: PASS: http://slexy.org/raw/s21M0IYcdI
8: beagleboard-vanilla: BOOT: PASS: http://slexy.org/raw/s2gCJ5VRr9
9: beaglebone-black: BOOT: PASS: http://slexy.org/raw/s2vvB4u86O
10: beaglebone: BOOT: PASS: http://slexy.org/raw/s208k0tU3V
11: dra72x-evm: BOOT: PASS: http://slexy.org/raw/s212oTeZ2w
12: dra7xx-evm: BOOT: PASS: http://slexy.org/raw/s24deU2xtY
13: omap5-evm: BOOT: PASS: http://slexy.org/raw/s2DkUAGU0i
14: pandaboard-es: BOOT: PASS: http://slexy.org/raw/s2UKuDaAFf
15: pandaboard-vanilla: BOOT: PASS: http://slexy.org/raw/s21VAyb14r
16: sdp4430: BOOT: PASS: http://slexy.org/raw/s2J6nAHynd
for TI SoCs impacted OMAP4 and AM437x (other than the exynos patches):
Tested-by: Nishanth Menon <nm at ti.com>
Acked-by: Nishanth Menon <nm at ti.com>
--
Regards,
Nishanth Menon
More information about the linux-arm-kernel
mailing list