[PATCH V4] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node

[Nishanth Menon]

TPS gpio now controls a 5v 500mA TL5209 regulator which may be supply
a fan (such as AFB02505HHB) over J1 connector for various purposes.
Provide device tree node to enable the same.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
V4: Change format of the speed-map used.
V3: https://patchwork.kernel.org/patch/5562121/
V2: https://patchwork.kernel.org/patch/5445111/
V1: https://patchwork.kernel.org/patch/5444911/

Enable and disable can be controlled by (post the RPM, it finds
closest match - even a 1 will do)

echo '13000' > /sys/class/hwmon/hwmon0/fan1_target
and
echo '0' > /sys/class/hwmon/hwmon0/fan1_target

Test log: http://slexy.org/view/s2T0ajh46z

requires CONFIG_GPIO_PALMAS and CONFIG_SENSORS_GPIO_FAN to be operational
Applies on v3.19-rc1

 arch/arm/boot/dts/am57xx-beagle-x15.dts |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 6c2e8e4..c5d4cea 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -80,6 +80,14 @@
 			default-state = "off";
 		};
 	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+	};
 };
 
 &dra7_pmx_core {
@@ -394,6 +402,12 @@
 			wakeup-source;
 			ti,palmas-long-press-seconds = <12>;
 		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
 	};
 
 	tmp102: tmp102 at 48 {
-- 
1.7.9.5