[PATCH v2 2/8] ARM: at91: dts: sama5d3: split isi pinctrl

[Josh Wu]

From: Bo Shen <voice.shen at atmel.com>

As the ISI has 12 data lines, however we only use 8 data lines with
sensor module. So, split the data line into two groups which make
it can be choosed depends on the hardware design.

Signed-off-by: Bo Shen <voice.shen at atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
 arch/arm/boot/dts/sama5d3.dtsi    | 11 ++++++++---
 arch/arm/boot/dts/sama5d3xmb.dtsi |  2 +-
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 61746ef..595609f 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -547,7 +547,7 @@
 				};
 
 				isi {
-					pinctrl_isi: isi-0 {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
 						atmel,pins =
 							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
 							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
@@ -559,10 +559,15 @@
 							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
 							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
 							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
-							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
-							 AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
 							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
 					};
+
 					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
 						atmel,pins =
 							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 49c10d3..2530541 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -61,7 +61,7 @@
 
 			isi: isi at f0034000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+				pinctrl-0 = <&pinctrl_isi_data_0_7 &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
 			};
 
 			mmc1: mmc at f8000000 {
-- 
1.9.1