[PATCH 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence

[Ulf Hansson]

The simple MMC power sequence provider, intends to supports a set of
common properties between SOC designs. It thus enables us to re-use the
same provider for several SOCs.

In this initial step, let's add the top level description of the MMC
power sequence and describe the compatible string for the simple MMC
power sequence provider.

Following patches will step by step add support for new properties to
the simple MMC power sequence provider.

Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
---
 .../devicetree/bindings/mmc/mmc,pwrseq-simple.txt      | 18 ++++++++++++++++++
 Documentation/devicetree/bindings/mmc/mmc.txt          |  5 +++++
 2 files changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/mmc,pwrseq-simple.txt

diff --git a/Documentation/devicetree/bindings/mmc/mmc,pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc,pwrseq-simple.txt
new file mode 100644
index 0000000..e1b7f9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc,pwrseq-simple.txt
@@ -0,0 +1,18 @@
+* The simple MMC power sequence provider
+
+System on chip designs may specify a specific MMC power sequence. To
+successfully detect an (e)MMC/SD/SDIO card, that power sequence must be
+maintained while initializing the card.
+
+The simple MMC power sequence provider, intends to supports a set of common
+properties between SOC designs. It thus enables us to re-use the same provider
+for several SOC designs.
+
+Required properties:
+- compatible : contains "mmc,pwrseq-simple".
+
+Example:
+
+	sdhci0_pwrseq {
+		compatible = "mmc,pwrseq-simple";
+	}
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index bac1311..b12de1e 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -64,6 +64,10 @@ Optional SDIO properties:
 - keep-power-in-suspend: Preserves card power during a suspend/resume cycle
 - enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
 
+Optional MMC power sequence:
+- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc,pwrseq-*"
+	for documentation of MMC power sequence bindings.
+
 
 Use of Function subnodes
 ------------------------
@@ -101,6 +105,7 @@ sdhci at ab000000 {
 	max-frequency = <50000000>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
+	mmc-pwrseq = <&sdhci0_pwrseq>
 }
 
 Example with sdio function subnode:
-- 
1.9.1