[PATCH] arch: arm: mach-ux500: board-mop500-regulators.c: Remove unused function

Arnd Bergmann arnd at arndb.de
Fri Jan 2 02:10:23 PST 2015


On Thursday 01 January 2015 16:40:05 Rickard Strandqvist wrote:
> Remove the function mop500_regulator_init() that is not used anywhere.
> 
> This was partially found by using a static code analysis program called cppcheck.
> 
> Signed-off-by: Rickard Strandqvist <rickard_strandqvist at spectrumdigital.se>

This looks wrong: For one thing, you failed to notice that now another function
in the same file becomes unused, or that half of the file is not used
anyway.

It also seems that the fact that this function is not called was an accident
and it should in fact be called. Maybe Lee has some more insight in this,
as he added the function in the first place.

Finally (unrelated to your patch, but triggered by looking at it), I suspect
we should just move the ab8500_regulator_plat_data and everything it references
to drivers/regulator/ab8500-ext.c, because we only have one instance of it
and won't ever have more.

	Arnd

> ---
>  arch/arm/mach-ux500/board-mop500-regulators.c |   41 -------------------------
>  arch/arm/mach-ux500/board-mop500-regulators.h |    2 --
>  2 files changed, 43 deletions(-)
> 
> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
> index 32d744e..156e83b 100644
> --- a/arch/arm/mach-ux500/board-mop500-regulators.c
> +++ b/arch/arm/mach-ux500/board-mop500-regulators.c
> @@ -1022,44 +1022,3 @@ static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
>  
>  	BUG_ON(1);
>  }
> -
> -void mop500_regulator_init(void)
> -{
> -	struct regulator_init_data *regulator;
> -
> -	/*
> -	 * Temporarily turn on Vaux2 on 8520 machine
> -	 */
> -	if (cpu_is_u8520()) {
> -		/* Vaux2 initialized to be on */
> -		ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05);
> -	}
> -
> -	/*
> -	 * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
> -	 * all HREFP_V20 boards)
> -	 */
> -	if (cpu_is_u8500v20()) {
> -		/* VextSupply2RequestCtrl =  HP/OFF depending on VxRequest */
> -		ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01);
> -
> -		/* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */
> -		ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2,
> -			0x20, 0x20);
> -
> -		/* VextSupply2 = force HP at initialization */
> -		ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04);
> -
> -		/* enable VextSupply2 during platform active */
> -		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
> -		regulator->constraints.always_on = 1;
> -
> -		/* disable VextSupply2 in suspend */
> -		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
> -		regulator->constraints.state_mem.disabled = 1;
> -		regulator->constraints.state_standby.disabled = 1;
> -
> -		/* enable VextSupply2 HW control (used in suspend) */
> -		regulator->driver_data = (void *)&ab8500_ext_supply2;
> -	}
> -}
> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
> index 9bece38..dc3ee77 100644
> --- a/arch/arm/mach-ux500/board-mop500-regulators.h
> +++ b/arch/arm/mach-ux500/board-mop500-regulators.h
> @@ -19,6 +19,4 @@ extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
>  extern struct regulator_init_data tps61052_regulator;
>  extern struct regulator_init_data gpio_en_3v3_regulator;
>  
> -void mop500_regulator_init(void);
> -
>  #endif
> 




More information about the linux-arm-kernel mailing list