[PATCH v7] edac: synps: Added EDAC support for zynq ddr ecc controller
Punnaiah Choudary Kalluri
punnaiah.choudary.kalluri at xilinx.com
Thu Jan 1 20:22:20 PST 2015
Added EDAC support for reporting the ecc errors of synopsys ddr controller.
The ddr ecc controller corrects single bit errors and detects double bit
errors.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia at xilinx.com>
---
Changes for v7:
- Fixed indentation and removed insignificant comments
- I have not taken care of spliting synps_edac_geterror_info function as
it adds additional indentation levels and moreover the existing changes were
made as part of the v2 review comments
Changes for v6:
- Fixed indentation and typo errors
- Corrected the function and structure headers
Changes for v5:
- Removed dt binding info as already there is a binding info available
under memorycontroller. so, updated ecc info there.
- corrected the ip version and function return types
Changes for v4:
- Shorten the macro definitions
- Corrected the ddr ip version
- Reverted the file name change
Changes for v3:
- Updated maintainer information
- Driver cleanup as per the review comments
- Shortened the prefix "sysnopsys" to "synps"
Changes for v2:
- Updated the commit header and message
- Renamed the filenames to synopsys_edac
- Corrected the compatilble string, commnets
- Renamed the macros,fucntions and data structures
---
MAINTAINERS | 1 +
drivers/edac/Kconfig | 7 +
drivers/edac/Makefile | 1 +
drivers/edac/synopsys_edac.c | 528 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 537 insertions(+), 0 deletions(-)
create mode 100644 drivers/edac/synopsys_edac.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 0ff630d..7601298 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1556,6 +1556,7 @@ N: xilinx
F: drivers/clocksource/cadence_ttc_timer.c
F: drivers/i2c/busses/i2c-cadence.c
F: drivers/mmc/host/sdhci-of-arasan.c
+F: drivers/edac/synopsys_edac.c
ARM SMMU DRIVER
M: Will Deacon <will.deacon at arm.com>
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 7072c28..b7b6691 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -385,4 +385,11 @@ config EDAC_ALTERA_MC
preloader must initialize the SDRAM before loading
the kernel.
+config EDAC_SYNOPSYS
+ tristate "Synopsys DDR Memory Controller"
+ depends on EDAC_MM_EDAC && ARCH_ZYNQ
+ help
+ Support for error detection and correction on the Synopsys DDR
+ memory controller.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 359aa49..9b5a095 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -67,3 +67,4 @@ obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o
obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o
obj-$(CONFIG_EDAC_ALTERA_MC) += altera_edac.o
+obj-$(CONFIG_EDAC_SYNOPSYS) += synopsys_edac.o
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
new file mode 100644
index 0000000..fa0e6fa
--- /dev/null
+++ b/drivers/edac/synopsys_edac.c
@@ -0,0 +1,528 @@
+/*
+ * Synopsys DDR ECC Driver
+ * This driver is based on ppc4xx_edac.c drivers
+ *
+ * Copyright (C) 2012 - 2014 Xilinx, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details
+ */
+
+#include <linux/edac.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "edac_core.h"
+
+/* Number of cs_rows needed per memory controller */
+#define SYNPS_EDAC_NR_CSROWS 1
+
+/* Number of channels per memory controller */
+#define SYNPS_EDAC_NR_CHANS 1
+
+/* Granularity of reported error in bytes */
+#define SYNPS_EDAC_ERR_GRAIN 1
+
+#define SYNPS_EDAC_MSG_SIZE 256
+
+#define SYNPS_EDAC_MOD_STRING "synps_edac"
+#define SYNPS_EDAC_MOD_VER "1"
+
+/* Synopsys DDR memory controller registers that are relevant to ECC */
+#define CTRL_OFST 0x0
+#define T_ZQ_OFST 0xA4
+
+/* ECC control register */
+#define ECC_CTRL_OFST 0xC4
+/* ECC log register */
+#define CE_LOG_OFST 0xC8
+/* ECC address register */
+#define CE_ADDR_OFST 0xCC
+/* ECC data[31:0] register */
+#define CE_DATA_31_0_OFST 0xD0
+
+/* Uncorrectable error info registers */
+#define UE_LOG_OFST 0xDC
+#define UE_ADDR_OFST 0xE0
+#define UE_DATA_31_0_OFST 0xE4
+
+#define STAT_OFST 0xF0
+#define SCRUB_OFST 0xF4
+
+/* Control register bit field definitions */
+#define CTRL_BW_MASK 0xC
+#define CTRL_BW_SHIFT 2
+
+#define DDRCTL_WDTH_16 1
+#define DDRCTL_WDTH_32 0
+
+/* ZQ register bit field definitions */
+#define T_ZQ_DDRMODE_MASK 0x2
+
+/* ECC control register bit field definitions */
+#define ECC_CTRL_CLR_CE_ERR 0x2
+#define ECC_CTRL_CLR_UE_ERR 0x1
+
+/* ECC correctable/uncorrectable error log register definitions */
+#define LOG_VALID 0x1
+#define CE_LOG_BITPOS_MASK 0xFE
+#define CE_LOG_BITPOS_SHIFT 1
+
+/* ECC correctable/uncorrectable error address register definitions */
+#define ADDR_COL_MASK 0xFFF
+#define ADDR_ROW_MASK 0xFFFF000
+#define ADDR_ROW_SHIFT 12
+#define ADDR_BANK_MASK 0x70000000
+#define ADDR_BANK_SHIFT 28
+
+/* ECC statistic register definitions */
+#define STAT_UECNT_MASK 0xFF
+#define STAT_CECNT_MASK 0xFF00
+#define STAT_CECNT_SHIFT 8
+
+/* ECC scrub register definitions */
+#define SCRUB_MODE_MASK 0x7
+#define SCRUB_MODE_SECDED 0x4
+
+/**
+ * struct ecc_error_info - ECC error log information
+ * @row: Row number
+ * @col: Column number
+ * @bank: Bank number
+ * @bitpos: Bit position
+ * @data: Data causing the error
+ */
+struct ecc_error_info {
+ u32 row;
+ u32 col;
+ u32 bank;
+ u32 bitpos;
+ u32 data;
+};
+
+/**
+ * struct synps_ecc_status - ECC status information to report
+ * @ce_cnt: Correctable error count
+ * @ue_cnt: Uncorrectable error count
+ * @ceinfo: Correctable error log information
+ * @ueinfo: Uncorrectable error log information
+ */
+struct synps_ecc_status {
+ u32 ce_cnt;
+ u32 ue_cnt;
+ struct ecc_error_info ceinfo;
+ struct ecc_error_info ueinfo;
+};
+
+/**
+ * struct synps_edac_priv - DDR memory controller private instance data
+ * @baseaddr: Base address of the DDR controller
+ * @ce_cnt: Correctable Error count
+ * @ue_cnt: Uncorrectable Error count
+ */
+struct synps_edac_priv {
+ void __iomem *baseaddr;
+ u32 ce_cnt;
+ u32 ue_cnt;
+};
+
+/**
+ * synps_edac_geterror_info - Get the current ecc error info
+ * @base: Pointer to the base address of the ddr memory controller
+ * @p: Pointer to the synopsys ecc status structure
+ *
+ * Determines there is any ecc error or not
+ *
+ * Return: one if there is no error otherwise returns zero
+ */
+static int synps_edac_geterror_info(void __iomem *base,
+ struct synps_ecc_status *p)
+{
+ u32 regval, clearval = 0;
+
+ regval = readl(base + STAT_OFST);
+ if (!regval)
+ return 1;
+
+ memset(p, 0, sizeof(*p));
+
+ p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT;
+ p->ue_cnt = regval & STAT_UECNT_MASK;
+
+ regval = readl(base + CE_LOG_OFST);
+ if (!(p->ce_cnt && (regval & LOG_VALID)))
+ goto ue_err;
+
+ p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT;
+ regval = readl(base + CE_ADDR_OFST);
+ p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
+ p->ceinfo.col = regval & ADDR_COL_MASK;
+ p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
+ p->ceinfo.data = readl(base + CE_DATA_31_0_OFST);
+ edac_dbg(3, "ce bit position: %d data: %d\n", p->ceinfo.bitpos,
+ p->ceinfo.data);
+ clearval = ECC_CTRL_CLR_CE_ERR;
+
+ue_err:
+ regval = readl(base + UE_LOG_OFST);
+ if (!(p->ue_cnt && (regval & LOG_VALID)))
+ goto out;
+
+ regval = readl(base + UE_ADDR_OFST);
+ p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
+ p->ueinfo.col = regval & ADDR_COL_MASK;
+ p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
+ p->ueinfo.data = readl(base + UE_DATA_31_0_OFST);
+ clearval |= ECC_CTRL_CLR_UE_ERR;
+
+out:
+ writel(clearval, base + ECC_CTRL_OFST);
+ writel(0x0, base + ECC_CTRL_OFST);
+
+ return 0;
+}
+
+/**
+ * synps_edac_handle_error - Handle controller error types CE and UE
+ * @mci: Pointer to the edac memory controller instance
+ * @p: Pointer to the synopsys ecc status structure
+ *
+ * Handles the controller ECC correctable and un correctable error.
+ */
+static void synps_edac_handle_error(struct mem_ctl_info *mci,
+ struct synps_ecc_status *p)
+{
+ char message[SYNPS_EDAC_MSG_SIZE];
+ struct ecc_error_info *pinf;
+
+ if (p->ce_cnt) {
+ pinf = &p->ceinfo;
+ snprintf(message, SYNPS_EDAC_MSG_SIZE,
+ "DDR ECC error type :%s Row %d Bank %d Col %d ",
+ "CE", pinf->row, pinf->bank, pinf->col);
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
+ p->ce_cnt, 0, 0, 0, 0, 0, -1,
+ message, "");
+ }
+
+ if (p->ue_cnt) {
+ pinf = &p->ueinfo;
+ snprintf(message, SYNPS_EDAC_MSG_SIZE,
+ "DDR ECC error type :%s Row %d Bank %d Col %d ",
+ "UE", pinf->row, pinf->bank, pinf->col);
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
+ p->ue_cnt, 0, 0, 0, 0, 0, -1,
+ message, "");
+ }
+}
+
+/**
+ * synps_edac_check - Check controller for ECC errors
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * Used to check and post ECC errors. Called by the polling thread
+ */
+static void synps_edac_check(struct mem_ctl_info *mci)
+{
+ struct synps_edac_priv *priv = mci->pvt_info;
+ struct synps_ecc_status stat;
+ int status;
+
+ status = synps_edac_geterror_info(priv->baseaddr, &stat);
+ if (status)
+ return;
+
+ priv->ce_cnt += stat.ce_cnt;
+ priv->ue_cnt += stat.ue_cnt;
+ synps_edac_handle_error(mci, &stat);
+
+ edac_dbg(3, "Total error count ce %d ue %d\n",
+ priv->ce_cnt, priv->ue_cnt);
+}
+
+/**
+ * synps_edac_get_dtype - Return the controller memory width
+ * @base: Pointer to the ddr memory controller base address
+ *
+ * Get the EDAC device type width appropriate for the current controller
+ * configuration.
+ *
+ * Return: a device type width enumeration.
+ */
+static enum dev_type synps_edac_get_dtype(const void __iomem *base)
+{
+ enum dev_type dt;
+ u32 width;
+
+ width = readl(base + CTRL_OFST);
+ width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT;
+
+ switch (width) {
+ case DDRCTL_WDTH_16:
+ dt = DEV_X2;
+ break;
+ case DDRCTL_WDTH_32:
+ dt = DEV_X4;
+ break;
+ default:
+ dt = DEV_UNKNOWN;
+ }
+
+ return dt;
+}
+
+/**
+ * synps_edac_get_eccstate - Return the controller ecc enable/disable status
+ * @base: Pointer to the ddr memory controller base address
+ *
+ * Get the ECC enable/disable status for the controller
+ *
+ * Return: a ecc status boolean i.e true/false - enabled/disabled.
+ */
+static bool synps_edac_get_eccstate(void __iomem *base)
+{
+ enum dev_type dt;
+ u32 ecctype;
+ bool state = false;
+
+ dt = synps_edac_get_dtype(base);
+ if (dt == DEV_UNKNOWN)
+ return state;
+
+ ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK;
+ if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2))
+ state = true;
+
+ return state;
+}
+
+/**
+ * synps_edac_get_memsize - reads the size of the attached memory device
+ *
+ * Return: the memory size in bytes
+ */
+static u32 synps_edac_get_memsize(void)
+{
+ struct sysinfo inf;
+
+ si_meminfo(&inf);
+
+ return inf.totalram * inf.mem_unit;
+}
+
+/**
+ * synps_edac_get_mtype - Returns controller memory type
+ * @base: pointer to the synopsys ecc status structure
+ *
+ * Get the EDAC memory type appropriate for the current controller
+ * configuration.
+ *
+ * Return: a memory type enumeration.
+ */
+static enum mem_type synps_edac_get_mtype(const void __iomem *base)
+{
+ enum mem_type mt;
+ u32 memtype;
+
+ memtype = readl(base + T_ZQ_OFST);
+
+ if (memtype & T_ZQ_DDRMODE_MASK)
+ mt = MEM_DDR3;
+ else
+ mt = MEM_DDR2;
+
+ return mt;
+}
+
+/**
+ * synps_edac_init_csrows - Initialize the cs row data
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * Initializes the chip select rows associated with the EDAC memory
+ * controller instance
+ *
+ * Return: Unconditionally 0.
+ */
+static int synps_edac_init_csrows(struct mem_ctl_info *mci)
+{
+ struct csrow_info *csi;
+ struct dimm_info *dimm;
+ struct synps_edac_priv *priv = mci->pvt_info;
+ u32 size;
+ int row, j;
+
+ for (row = 0; row < mci->nr_csrows; row++) {
+ csi = mci->csrows[row];
+ size = synps_edac_get_memsize();
+
+ for (j = 0; j < csi->nr_channels; j++) {
+ dimm = csi->channels[j]->dimm;
+ dimm->edac_mode = EDAC_FLAG_SECDED;
+ dimm->mtype = synps_edac_get_mtype(priv->baseaddr);
+ dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels;
+ dimm->grain = SYNPS_EDAC_ERR_GRAIN;
+ dimm->dtype = synps_edac_get_dtype(priv->baseaddr);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * synps_edac_mc_init - Initialize driver instance
+ * @mci: Pointer to the edac memory controller instance
+ * @pdev: Pointer to the platform_device struct
+ *
+ * Performs initialization of the EDAC memory controller instance and
+ * related driver-private data associated with the memory controller the
+ * instance is bound to.
+ *
+ * Return: Always zero.
+ */
+static int synps_edac_mc_init(struct mem_ctl_info *mci,
+ struct platform_device *pdev)
+{
+ int status;
+ struct synps_edac_priv *priv;
+
+ mci->pdev = &pdev->dev;
+ priv = mci->pvt_info;
+ platform_set_drvdata(pdev, mci);
+
+ /* Initialize controller capabilities and configuration */
+ mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->scrub_cap = SCRUB_HW_SRC;
+ mci->scrub_mode = SCRUB_NONE;
+
+ mci->edac_cap = EDAC_FLAG_SECDED;
+ mci->ctl_name = "synps_ddr_controller";
+ mci->dev_name = SYNPS_EDAC_MOD_STRING;
+ mci->mod_name = SYNPS_EDAC_MOD_VER;
+ mci->mod_ver = "1";
+
+ edac_op_state = EDAC_OPSTATE_POLL;
+ mci->edac_check = synps_edac_check;
+ mci->ctl_page_to_phys = NULL;
+
+ status = synps_edac_init_csrows(mci);
+
+ return status;
+}
+
+/**
+ * synps_edac_mc_probe - Check controller and bind driver
+ * @pdev: Pointer to the platform_device struct
+ *
+ * Probes a specific controller instance for binding with the driver.
+ *
+ * Return: 0 if the controller instance was successfully bound to the
+ * driver; otherwise, < 0 on error.
+ */
+static int synps_edac_mc_probe(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[2];
+ struct synps_edac_priv *priv;
+ int rc;
+ struct resource *res;
+ void __iomem *baseaddr;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ baseaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(baseaddr))
+ return PTR_ERR(baseaddr);
+
+ if (!synps_edac_get_eccstate(baseaddr)) {
+ edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
+ return -ENXIO;
+ }
+
+ layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+ layers[0].size = SYNPS_EDAC_NR_CSROWS;
+ layers[0].is_virt_csrow = true;
+ layers[1].type = EDAC_MC_LAYER_CHANNEL;
+ layers[1].size = SYNPS_EDAC_NR_CHANS;
+ layers[1].is_virt_csrow = false;
+
+ mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+ sizeof(struct synps_edac_priv));
+ if (!mci) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed memory allocation for mc instance\n");
+ return -ENOMEM;
+ }
+
+ priv = mci->pvt_info;
+ priv->baseaddr = baseaddr;
+ rc = synps_edac_mc_init(mci, pdev);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed to initialize instance\n");
+ goto free_edac_mc;
+ }
+
+ rc = edac_mc_add_mc(mci);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed to register with EDAC core\n");
+ goto free_edac_mc;
+ }
+
+ writel(0x0, baseaddr + ECC_CTRL_OFST);
+ return rc;
+
+free_edac_mc:
+ edac_mc_free(mci);
+
+ return rc;
+}
+
+/**
+ * synps_edac_mc_remove - Unbind driver from controller
+ * @pdev: Pointer to the platform_device struct
+ *
+ * Return: Unconditionally 0
+ */
+static int synps_edac_mc_remove(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+
+ return 0;
+}
+
+static struct of_device_id synps_edac_match[] = {
+ { .compatible = "xlnx,zynq-ddrc-a05", },
+ { /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, synps_edac_match);
+
+static struct platform_driver synps_edac_mc_driver = {
+ .driver = {
+ .name = "synopsys-edac",
+ .of_match_table = synps_edac_match,
+ },
+ .probe = synps_edac_mc_probe,
+ .remove = synps_edac_mc_remove,
+};
+
+module_platform_driver(synps_edac_mc_driver);
+
+MODULE_AUTHOR("Xilinx Inc");
+MODULE_DESCRIPTION("Synopsys DDR ECC driver");
+MODULE_LICENSE("GPL v2");
--
1.7.4
More information about the linux-arm-kernel
mailing list