[PATCH v9 20/21] Documentation: ACPI for ARM64
Shannon Zhao
zhaoshenglong at huawei.com
Fri Feb 27 03:13:38 PST 2015
On 2015/2/27 18:53, Shannon Zhao wrote:
> On 2015/2/25 16:40, Hanjun Guo wrote:
>> From: Graeme Gregory <graeme.gregory at linaro.org>
>>
>> Add documentation for the guidelines of how to use ACPI
>> on ARM64.
>>
>> Reviewed-by: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
>> Reviewed-by: Yi Li <phoenix.liyi at huawei.com>
>> Reviewed-by: Mark Langsdorf <mlangsdo at redhat.com>
>> Reviewed-by: Ashwin Chaugule <ashwinc at codeaurora.org>
>> Acked-by: Robert Richter <rrichter at cavium.com>
>> Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
>> Signed-off-by: Al Stone <al.stone at linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
>> ---
>> Documentation/arm64/arm-acpi.txt | 506 +++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 506 insertions(+)
>> create mode 100644 Documentation/arm64/arm-acpi.txt
>>
>> diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.txt
>> new file mode 100644
>> index 0000000..24cf832
>> --- /dev/null
>> +++ b/Documentation/arm64/arm-acpi.txt
>> @@ -0,0 +1,506 @@
>> +ACPI on ARMv8 Servers
>> +---------------------
>> +ACPI can be used for ARMv8 general purpose servers designed to follow
>> +the ARM SBSA (Server Base System Architecture) [0] and SBBR (Server
>> +Base Boot Requirements) [1] specifications. Please note that the SBBR
>> +can be retrieved simply by visiting [1], but the SBSA is currently only
>> +available to those with an ARM login due to ARM IP licensing concerns.
>> +
>> +The ARMv8 kernel implements the reduced hardware model of ACPI version
>> +5.1 or later. Links to the specification and all external documents
>> +it refers to are managed by the UEFI Forum. The specification is
>> +available at http://www.uefi.org/specifications and documents referenced
>> +by the specification can be found via http://www.uefi.org/acpi.
>> +
>> +If an ARMv8 system does not meet the requirements of the SBSA and SBBR,
>> +or cannot be described using the mechanisms defined in the required ACPI
>> +specifications, then ACPI may not be a good fit for the hardware.
>> +
>> +While the documents mentioned above set out the requirements for building
>> +industry-standard ARMv8 servers, they also apply to more than one operating
>> +system. The purpose of this document is to describe the interaction between
>> +ACPI and Linux only, on an ARMv8 system -- that is, what Linux expects of
>> +ACPI and what ACPI can expect of Linux.
>> +
>> +
>
> Here. Two blank lines.
>
>> +Why ACPI on ARM?
>
>
not here. ignore this :-)
--
Thanks,
Shannon
More information about the linux-arm-kernel
mailing list