[PATCHv2 14/15] ARM: mvebu: add Device Tree files for Armada 39x SoC and board
Gregory CLEMENT
gregory.clement at free-electrons.com
Thu Feb 26 08:19:25 PST 2015
Hi Thomas,
On 20/02/2015 18:04, Thomas Petazzoni wrote:
> This commit adds the Device Tree files for the Armada 39x family of
> processors, as well as one Armada 398 Development Board.
>
> Like for other Marvell EBU families, a common armada-39x.dtsi contains
> the description of the common features of all Armada 39x SoCs, while
> armada-390.dtsi and armada-398.dtsi respectively describe the
> specificities of those SoCs.
>
> Finally, an armada-398-db.dts file is added to describe the Armada 398
> Development Board itself.
>
> So far, the following features are supported:
>
> * SMP: dual Cortex-A9
> * Basic ARM IPs: SCU, timer, GIC
> * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus
> controller, MPIC interrupt controller, timer, CPU reset for SMP,
> PMSU.
> * I2C
> * UART
> * PCIe
>
> Additional features will be supported in the future.
These device trees seem OK, I only found a small typo in the mpic node,
see below.
I also booted the kernel and I got the following error:
L2C: failed to init: -19
Actually it seems that the L2 cache controller node is missing.
Is it intentional?
If for now you don't want to add the support for the L2 cache controller then
you should remove the initialization of the l2c_aux_val and l2c_aux_mask field
in the machine_desc structure.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/armada-390.dtsi | 57 +++++
> arch/arm/boot/dts/armada-398-db.dts | 154 +++++++++++
> arch/arm/boot/dts/armada-398.dtsi | 60 +++++
> arch/arm/boot/dts/armada-39x.dtsi | 494 ++++++++++++++++++++++++++++++++++++
> 5 files changed, 767 insertions(+)
> create mode 100644 arch/arm/boot/dts/armada-390.dtsi
> create mode 100644 arch/arm/boot/dts/armada-398-db.dts
> create mode 100644 arch/arm/boot/dts/armada-398.dtsi
> create mode 100644 arch/arm/boot/dts/armada-39x.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 968bc7a..64886fb 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -540,6 +540,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
> armada-388-db.dtb \
> armada-388-gp.dtb \
> armada-388-rd.dtb
> +dtb-$(CONFIG_MACH_ARMADA_39X) += \
> + armada-398-db.dtb
> dtb-$(CONFIG_MACH_ARMADA_XP) += \
> armada-xp-axpwifiap.dtb \
> armada-xp-db.dtb \
> diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
> new file mode 100644
> index 0000000..094e39c
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-390.dtsi
> @@ -0,0 +1,57 @@
> +/*
> + * Device Tree Include file for Marvell Armada 390 SoC.
> + *
> + * Copyright (C) 2015 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "armada-39x.dtsi"
> +
> +/ {
> + soc {
> + internal-regs {
> + pinctrl at 18000 {
> + compatible = "marvell,mv88f6920-pinctrl";
> + reg = <0x18000 0x20>;
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
> new file mode 100644
> index 0000000..15dac29
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-398-db.dts
> @@ -0,0 +1,154 @@
> +/*
> + * Device Tree Include file for Marvell Armada 398 Development Board
> + *
> + * Copyright (C) 2015 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "armada-398.dtsi"
> +
> +/ {
> + model = "Marvell Armada 398 Development Board";
> + compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + stdout-path = &uart0;
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x80000000>; /* 2 GB */
> + };
> +
> + soc {
> + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
> + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
> +
> + internal-regs {
> + spi at 10680 {
> + status = "okay";
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-names = "default";
> +
> + spi-flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "n25q128a13";
> + reg = <0>;
> + spi-max-frequency = <108000000>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0 0x400000>;
> + };
> +
> + partition at 400000 {
> + label = "Filesystem";
> + reg = <0x400000 0x1000000>;
> + };
> + };
> + };
> +
> + i2c at 11000 {
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> + clock-frequency = <100000>;
> + };
> +
> + serial at 12000 {
> + pinctrl-0 = <&uart0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> + };
> +
> + serial at 12100 {
> + pinctrl-0 = <&uart1_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> + };
> +
> + flash at d0000 {
> + status = "okay";
> + pinctrl-0 = <&nand_pins>;
> + pinctrl-names = "default";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> + nand-ecc-strength = <8>;
> + nand-ecc-step-size = <512>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0 0x800000>;
> + };
> + partition at 800000 {
> + label = "Linux";
> + reg = <0x800000 0x800000>;
> + };
> + partition at 1000000 {
> + label = "Filesystem";
> + reg = <0x1000000 0x3f000000>;
> + };
> + };
> + };
> +
> + pcie-controller {
> + status = "okay";
> +
> + pcie at 1,0 {
> + status = "okay";
> + };
> +
> + pcie at 2,0 {
> + status = "okay";
> + };
> +
> + pcie at 3,0 {
> + status = "okay";
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
> new file mode 100644
> index 0000000..fdc2591
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-398.dtsi
> @@ -0,0 +1,60 @@
> +/*
> + * Device Tree Include file for Marvell Armada 398 SoC.
> + *
> + * Copyright (C) 2015 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "armada-39x.dtsi"
> +
> +/ {
> + compatible = "marvell,armada398", "marvell,armada390";
> +
> + soc {
> + internal-regs {
> + pinctrl at 18000 {
> + compatible = "marvell,mv88f6928-pinctrl";
> + reg = <0x18000 0x20>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
> new file mode 100644
> index 0000000..fe43cd7
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-39x.dtsi
> @@ -0,0 +1,494 @@
> +/*
> + * Device Tree Include file for Marvell Armada 39x family of SoCs.
> + *
> + * Copyright (C) 2015 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "skeleton.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
> +
> +/ {
> + model = "Marvell Armada 39x family SoC";
> + compatible = "marvell,armada390";
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "marvell,armada-390-smp";
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg = <0>;
> + };
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg = <1>;
> + };
> + };
> +
> + soc {
> + compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
> + "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + controller = <&mbusc>;
> + interrupt-parent = <&gic>;
> + pcie-mem-aperture = <0xe0000000 0x8000000>;
> + pcie-io-aperture = <0xe8000000 0x100000>;
> +
> + bootrom {
> + compatible = "marvell,bootrom";
> + reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
> + };
> +
> + internal-regs {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
> +
> + scu at c000 {
> + compatible = "arm,cortex-a9-scu";
> + reg = <0xc000 0x100>;
> + };
> +
> + timer at c600 {
> + compatible = "arm,cortex-a9-twd-timer";
> + reg = <0xc600 0x20>;
> + interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
> + clocks = <&coreclk 2>;
> + };
> +
> + gic: interrupt-controller at d000 {
> + compatible = "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #size-cells = <0>;
> + interrupt-controller;
> + reg = <0xd000 0x1000>,
> + <0xc100 0x100>;
> + };
> +
> + spi0: spi at 10600 {
> + compatible = "marvell,orion-spi";
> + reg = <0x10600 0x50>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cell-index = <0>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + spi1: spi at 10680 {
> + compatible = "marvell,orion-spi";
> + reg = <0x10680 0x50>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cell-index = <1>;
> + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c at 11000 {
> + compatible = "marvell,mv64xxx-i2c";
> + reg = <0x11000 0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + timeout-ms = <1000>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c at 11100 {
> + compatible = "marvell,mv64xxx-i2c";
> + reg = <0x11100 0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + timeout-ms = <1000>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at 11200 {
> + compatible = "marvell,mv64xxx-i2c";
> + reg = <0x11200 0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + timeout-ms = <1000>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c at 11300 {
> + compatible = "marvell,mv64xxx-i2c";
> + reg = <0x11300 0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + timeout-ms = <1000>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + uart0: serial at 12000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x12000 0x100>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg-io-width = <1>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 12100 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x12100 0x100>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg-io-width = <1>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 12200 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x12200 0x100>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg-io-width = <1>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 12300 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x12300 0x100>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + reg-io-width = <1>;
> + clocks = <&coreclk 0>;
> + status = "disabled";
> + };
> +
> + pinctrl at 18000 {
> + i2c0_pins: i2c0-pins {
> + marvell,pins = "mpp2", "mpp3";
> + marvell,function = "i2c0";
> + };
> +
> + uart0_pins: uart0-pins {
> + marvell,pins = "mpp0", "mpp1";
> + marvell,function = "ua0";
> + };
> +
> + uart1_pins: uart1-pins {
> + marvell,pins = "mpp19", "mpp20";
> + marvell,function = "ua1";
> + };
> +
> + spi1_pins: spi1-pins {
> + marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
> + marvell,function = "spi1";
> + };
> +
> + nand_pins: nand-pins {
> + marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
> + "mpp38", "mpp28", "mpp40", "mpp42",
> + "mpp35", "mpp36", "mpp25", "mpp30",
> + "mpp32";
> + marvell,function = "dev";
> + };
> + };
> +
> + system-controller at 18200 {
> + compatible = "marvell,armada-390-system-controller",
> + "marvell,armada-370-xp-system-controller";
> + reg = <0x18200 0x100>;
> + };
> +
> + gateclk: clock-gating-control at 18220 {
> + compatible = "marvell,armada-390-gating-clock";
> + reg = <0x18220 0x4>;
> + clocks = <&coreclk 0>;
> + #clock-cells = <1>;
> + };
> +
> + coreclk: mvebu-sar at 18600 {
> + compatible = "marvell,armada-390-core-clock";
> + reg = <0x18600 0x04>;
> + #clock-cells = <1>;
> + };
> +
> + mbusc: mbus-controller at 20000 {
> + compatible = "marvell,mbus-controller";
> + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
> + };
> +
> + mpic: interrupt-controller at 20000 {
it should be
mpic: interrupt-controller at 20a00 {
Thanks,
Gregory
> + compatible = "marvell,mpic";
> + reg = <0x20a00 0x2d0>, <0x21070 0x58>;
> + #interrupt-cells = <1>;
> + #size-cells = <1>;
> + interrupt-controller;
> + msi-controller;
> + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer at 20300 {
> + compatible = "marvell,armada-380-timer",
> + "marvell,armada-xp-timer";
> + reg = <0x20300 0x30>, <0x21040 0x30>;
> + interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <&mpic 5>,
> + <&mpic 6>;
> + clocks = <&coreclk 2>, <&coreclk 5>;
> + clock-names = "nbclk", "fixed";
> + };
> +
> + cpurst at 20800 {
> + compatible = "marvell,armada-370-cpu-reset";
> + reg = <0x20800 0x10>;
> + };
> +
> + pmsu at 22000 {
> + compatible = "marvell,armada-390-pmsu",
> + "marvell,armada-380-pmsu";
> + reg = <0x22000 0x1000>;
> + };
> +
> + xor at 60800 {
> + compatible = "marvell,orion-xor";
> + reg = <0x60800 0x100
> + 0x60a00 0x100>;
> + clocks = <&gateclk 22>;
> + status = "okay";
> +
> + xor00 {
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> + dmacap,memcpy;
> + dmacap,xor;
> + };
> + xor01 {
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + dmacap,memcpy;
> + dmacap,xor;
> + dmacap,memset;
> + };
> + };
> +
> + xor at 60900 {
> + compatible = "marvell,orion-xor";
> + reg = <0x60900 0x100
> + 0x60b00 0x100>;
> + clocks = <&gateclk 28>;
> + status = "okay";
> +
> + xor10 {
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> + dmacap,memcpy;
> + dmacap,xor;
> + };
> + xor11 {
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> + dmacap,memcpy;
> + dmacap,xor;
> + dmacap,memset;
> + };
> + };
> +
> + flash at d0000 {
> + compatible = "marvell,armada370-nand";
> + reg = <0xd0000 0x54>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&coredivclk 0>;
> + status = "disabled";
> + };
> +
> + sdhci at d8000 {
> + compatible = "marvell,armada-380-sdhci";
> + reg = <0xd8000 0x1000>, <0xdc000 0x100>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gateclk 17>;
> + mrvl,clk-delay-cycles = <0x1F>;
> + status = "disabled";
> + };
> +
> + coredivclk: clock at e4250 {
> + compatible = "marvell,armada-390-corediv-clock",
> + "marvell,armada-380-corediv-clock";
> + reg = <0xe4250 0xc>;
> + #clock-cells = <1>;
> + clocks = <&mainpll>;
> + clock-output-names = "nand";
> + };
> + };
> +
> + pcie-controller {
> + compatible = "marvell,armada-370-pcie";
> + status = "disabled";
> + device_type = "pci";
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + msi-parent = <&mpic>;
> + bus-range = <0x00 0xff>;
> +
> + ranges =
> + <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
> + 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
> + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
> + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
> + 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
> + 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
> + 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
> + 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
> + 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */
> + 0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
> + 0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>;
> +
> + /*
> + * This port can be either x4 or x1. When
> + * configured in x4 by the bootloader, then
> + * pcie at 4,0 is not available.
> + */
> + pcie at 1,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
> + reg = <0x0800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> + 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + marvell,pcie-port = <0>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 8>;
> + status = "disabled";
> + };
> +
> + /* x1 port */
> + pcie at 2,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
> + reg = <0x1000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> + 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + marvell,pcie-port = <1>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 5>;
> + status = "disabled";
> + };
> +
> + /* x1 port */
> + pcie at 3,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
> + reg = <0x1800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> + 0x81000000 0 0 0x81000000 0x3 0 1 0>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> + marvell,pcie-port = <2>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 6>;
> + status = "disabled";
> + };
> +
> + /*
> + * x1 port only available when pcie at 1,0 is
> + * configured as a x1 port
> + */
> + pcie at 4,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
> + reg = <0x2000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
> + 0x81000000 0 0 0x81000000 0x4 0 1 0>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> + marvell,pcie-port = <3>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 7>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + clocks {
> + /* 2 GHz fixed main PLL */
> + mainpll: mainpll {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <2000000000>;
> + };
> + };
> +};
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list