[PATCHv3 29/35] ARM: dts: am4372: merge control module features under scrm node
Tero Kristo
t-kristo at ti.com
Wed Feb 25 11:04:39 PST 2015
This patch moves all the control module related features under scrm
node. scm_conf area is provided to support syscon, and also the clocks
are moved under scm_conf area.
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
arch/arm/boot/dts/am4372.dtsi | 48 +++++++++++++++++++++++------------------
1 file changed, 27 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1943fc3..f41b82a 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -57,22 +57,6 @@
cache-level = <2>;
};
- am43xx_control_module: control_module at 4a002000 {
- compatible = "syscon";
- reg = <0x44e10000 0x7f4>;
- };
-
- am43xx_pinmux: pinmux at 44e10800 {
- compatible = "ti,am437-padconf", "pinctrl-single";
- reg = <0x44e10800 0x31c>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
ocp {
compatible = "ti,am4372-l3-noc", "simple-bus";
#address-cells = <1>;
@@ -98,12 +82,34 @@
};
scrm: scrm at 44e10000 {
- compatible = "ti,am4-scrm";
- reg = <0x44e10000 0x2000>;
+ compatible = "ti,am4-scrm", "simple-bus";
+ reg = <0x44e10000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x44e10000 0x1000>;
- scrm_clocks: clocks {
+ am43xx_pinmux: pinmux at 800 {
+ compatible = "ti,am437-padconf",
+ "pinctrl-single";
+ reg = <0x800 0x31c>;
#address-cells = <1>;
#size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ scm_conf: tisyscon at 0 {
+ compatible = "syscon";
+ reg = <0x0 0x7fc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
scrm_clockdomains: clockdomains {
@@ -933,7 +939,7 @@
clocks = <&dcan0_fck>;
clock-names = "fck";
reg = <0x481cc000 0x2000>;
- syscon-raminit = <&am43xx_control_module 0x644 0>;
+ syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -944,7 +950,7 @@
clocks = <&dcan1_fck>;
clock-names = "fck";
reg = <0x481d0000 0x2000>;
- syscon-raminit = <&am43xx_control_module 0x644 1>;
+ syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list