[PATCH 2/2] ARM: shmobile: r8a7794: add GPIO DT support

[Sergei Shtylyov]

Hello.

On 2/25/2015 1:11 PM, Laurent Pinchart wrote:

>> Describe GPIO[0-6] controllers in the R8A7794 device tree.

>> Based on original patch by Hisashi Nakamura
>> <hisashi.nakamura.ak at renesas.com>.

>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

>> ---
>>   arch/arm/boot/dts/r8a7794.dtsi |   84 +++++++++++++++++++++++++++++++++++++
>>   1 file changed, 84 insertions(+)

>>
>> Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
>> ===================================================================
>> --- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
>> +++ renesas/arch/arm/boot/dts/r8a7794.dtsi
>> @@ -50,6 +50,90 @@
[...]
>> +	gpio1: gpio at e6051000 {
>> +		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
>> +		reg = <0 0xe6051000 0 0x50>;
>> +		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
>> +		#gpio-cells = <2>;
>> +		gpio-controller;
>> +		gpio-ranges = <&pfc 0 32 32>;

> This GPIO block has 26 GPIOs only.

[...]
>> +	gpio5: gpio at e6055000 {
>> +		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
>> +		reg = <0 0xe6055000 0 0x50>;
>> +		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
>> +		#gpio-cells = <2>;
>> +		gpio-controller;
>> +		gpio-ranges = <&pfc 0 160 32>;

> This GPIO block has 28 GPIOs only.

>> +		#interrupt-cells = <2>;
>> +		interrupt-controller;
>> +		clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
>> +	};
>> +
>> +	gpio6: gpio at e6055400 {
>> +		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
>> +		reg = <0 0xe6055400 0 0x50>;
>> +		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
>> +		#gpio-cells = <2>;
>> +		gpio-controller;
>> +		gpio-ranges = <&pfc 0 192 32>;

> This GPIO block has 26 GPIOs only.

    Yes, I know; I just wasn't sure what to do with the "gpio-ranges" prop of 
the following GPIO node. Should I keep the base GPIO # or update it as well?

WBR, Sergei