[PATCH V5 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
Jaehoon Chung
jh80.chung at samsung.com
Tue Feb 24 22:35:16 PST 2015
Hi, Alim.
Acked-by: Jaehoon Chung <jh80.chung at samsung.com>
Best Regards,
Jaehoon Chung
On 01/29/2015 11:41 AM, Alim Akhtar wrote:
> From: Seungwon Jeon <tgih.jun at samsung.com>
>
> HS400 timing values are added for SMDK5420, exynos5420-peach-pit
> and exynos5800-peach-pi boards.
> This also adds RCLK GPIO line, this gpio should be in pull-down
> state.
> This also enables HS400 on peach-pi and this updates the clock frequency
> to 800MHz to be set as input clock to controller.
>
> Signed-off-by: Seungwon Jeon <tgih.jun at samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
> [Alim: addressed review comments]
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 +++-
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 4 +++-
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 7 +++++--
> 4 files changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index 9a050e1..f7a44a4 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -569,8 +569,10 @@
> samsung,dw-mshc-ciu-div = <3>;
> samsung,dw-mshc-sdr-timing = <0 4>;
> samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 2>;
> + samsung,read-strobe-delay = <90>;
> pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> bus-width = <8>;
> };
>
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index ba686e4..8b15316 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -201,6 +201,13 @@
> samsung,pin-drv = <3>;
> };
>
> + sd0_rclk: sd0-rclk {
> + samsung,pins = "gpc0-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <3>;
> + };
> +
> sd1_cmd: sd1-cmd {
> samsung,pins = "gpc1-1";
> samsung,pin-function = <2>;
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index 8be3d7b..2078a1f 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -80,8 +80,10 @@
> samsung,dw-mshc-ciu-div = <3>;
> samsung,dw-mshc-sdr-timing = <0 4>;
> samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 2>;
> + samsung,read-strobe-delay = <90>;
> pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> bus-width = <8>;
> cap-mmc-highspeed;
> };
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index e8fdda8..96f0d61 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -550,15 +550,18 @@
> num-slots = <1>;
> broken-cd;
> mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> cap-mmc-highspeed;
> non-removable;
> card-detect-delay = <200>;
> - clock-frequency = <400000000>;
> + clock-frequency = <800000000>;
> samsung,dw-mshc-ciu-div = <3>;
> samsung,dw-mshc-sdr-timing = <0 4>;
> samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 2>;
> + samsung,read-strobe-delay = <90>;
> pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> bus-width = <8>;
> };
>
>
More information about the linux-arm-kernel
mailing list