[PATCH v3 2/4] ARM: sti: stih407-family: Add platform interconnects to always-on clk domain

[Lee Jones]

Certain clocks should not be turned of by clk_disable_unused.  Until
now we have been using the kernel command-line of the same name to
prevent common clk from turning off all clocks without a reference,
as this would ensure hardware lockup.  This patch lists each
platform interconnect which needs to stay on to prevent the
aforementioned issue from arising.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c06a546..35c74c6 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -34,6 +34,21 @@
 		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
 	};
 
+	/*
+	 * ICNs are not visible/controllable in Linux, but references to their
+	 * clocks must be obtained and retained or the platform will become
+	 * irrecoverably unresponsive.
+	 */
+	icn {
+		compatible = "clk-always-on";
+		clocks = <&clk_s_c0_flexgen CLK_ICN_SBC>,
+			 <&clk_s_c0_flexgen CLK_ICN_CPU>,
+			 <&clk_s_c0_flexgen CLK_ICN_LMI>,
+			 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+			 <&clk_s_a0_flexgen CLK_IC_LMI0>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+	};
+
 	scu at 08760000 {
 		compatible = "arm,cortex-a9-scu";
 		reg = <0x08760000 0x1000>;
-- 
1.9.1