New l3-noc error with CPUFREQ_DT built-in with v4.0-rc1

[Tony Lindgren]

* Tony Lindgren <tony at atomide.com> [150223 19:29]:
> * Felipe Balbi <balbi at ti.com> [150223 19:19]:
> > On Mon, Feb 23, 2015 at 07:01:42PM -0800, Tony Lindgren wrote:
> > > * Tony Lindgren <tony at atomide.com> [150223 18:43]:
> > > 
> > > Looks like the address is 0 for "Custom Error". Anyways, reverting
> > 
> > yeah, that's because the error comes from l4per2, not l3 :-)
> 
> Right so it seems :)
>  
> > > a fix for similar issue found on omap3 so far seems to help, that's
> > > 3d009c8c61f9 ("gpio: omap: Fix bad device access with setup_irq()").
> > 
> > if we revert that, we regress omap3, right ?
> 
> Yes we saw that getting triggered on omap3/4 before 3d009c8c61f9.
> 
> Now looking at the stack trace again, it actually has something:
> 
> ...
> [<c05999a4>] (__irq_svc) from [<c0599164>] (_raw_spin_unlock_irqrestore+0x34/0x44)
> [<c0599164>] (_raw_spin_unlock_irqrestore) from [<c0027120>] (omap_hwmod_idle+0x34/0x44)
> [<c0027120>] (omap_hwmod_idle) from [<c00283f8>] (omap_device_idle+0x38/0x78)
> [<c00283f8>] (omap_device_idle) from [<c0028454>] (_od_runtime_suspend+0x1c/0x24)
> [<c0028454>] (_od_runtime_suspend) from [<c03b5214>] (__rpm_callback+0x2c/0x60)
> [<c03b5214>] (__rpm_callback) from [<c03b5268>] (rpm_callback+0x20/0x80)
> [<c03b5268>] (rpm_callback) from [<c03b56b8>] (rpm_suspend+0xe8/0x55c)
> [<c03b56b8>] (rpm_suspend) from [<c03b6bdc>] (pm_runtime_work+0x74/0xa8)
> [<c03b6bdc>] (pm_runtime_work) from [<c0054608>] (process_one_work+0x1b0/0x4a0)
> ...
> 
> If it's the gpio-omap, there's probably some confusion still in
> the driver regarding the GPIO bank idle status. Anyways, will look
> more into it tomorrow.

And now I'm seeing the error with 3d009c8c61f9 reverted, so it
does not seem to be that either..

Regards,

Tony