[PATCH 08/12] ARM: DT: apq8064: Add USB OTG support for CM QS-600

[Igor Grinberg]

On 02/23/15 09:55, Srinivas Kandagatla wrote:
> From: Nicolas Dechesne <nicolas.dechesne at linaro.org>
> 
> This patch adds USB OTG support on USB1 for Compulab QS-600 Board.
> 
> Signed-off-by: Nicolas Dechesne <nicolas.dechesne at linaro.org>

Acked-by: Igor Grinberg <grinberg at compulab.co.il>

> ---
>  arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> index af2e075..6349f24 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -41,6 +41,11 @@
>  			};
>  		};
>  
> +		/* OTG */
> +		usb1_phy:phy at 12500000 {
> +			status = "ok";
> +		};
> +
>  		usb3_phy:phy at 12520000 {
>  			status = "ok";
>  		};
> @@ -48,7 +53,16 @@
>  		usb4_phy:phy at 12530000 {
>  			status = "ok";
>  		};
> -		
> +
> +		gadget1:gadget at 12500000 {
> +			status = "ok";
> +		};
> +
> +		/* OTG */
> +		usb1: usb at 12500000 {
> +			status = "ok";
> +		};
> +
>  		usb3: usb at 12520000 {
>  			status = "ok";
>  		};
> 

-- 
Regards,
Igor.