[PATCH 05/12] ARM: dts: APQ8064: Add MDP support
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Sun Feb 22 23:55:27 PST 2015
From: Rob Clark <robdclark at gmail.com>
This patch adds MDP node to APQ8064 dt.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 112 ++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index e65aff0..9c2e9b2 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1,6 +1,7 @@
/dts-v1/;
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
@@ -94,6 +95,20 @@
};
};
+ hdmi_pinctrl: hdmi-pinctrl {
+ mux1 {
+ pins = "gpio69", "gpio70", "gpio71";
+ function = "hdmi";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ mux2 {
+ pins = "gpio72";
+ function = "hdmi";
+ bias-pull-down;
+ drive-strength = <16>;
+ };
+ };
ps_hold: ps_hold {
mux {
pins = "gpio78";
@@ -228,6 +243,18 @@
};
};
+ ext_3p3v: regulator-fixed at 1 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ext_3p3v";
+ regulator-type = "voltage";
+ startup-delay-us = <0>;
+ gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
qcom,ssbi at 500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
@@ -426,6 +453,13 @@
reg = <QCOM_RPM_PM8921_LDO27>;
};
+ pm8921_hdmi_mvs: pm8921-hdmi-mvs {
+ compatible = "qcom,rpm-pm8921-switch";
+ reg = <QCOM_RPM_HDMI_SWITCH>;
+ regulator-always-on;
+ bias-pull-down;
+ };
+
pm8921_l28: pm8921-l28 {
compatible = "qcom,rpm-pm8921-nldo1200";
reg = <QCOM_RPM_PM8921_LDO28>;
@@ -704,5 +738,83 @@
pinctrl-0 = <&sdc4_gpios>;
};
};
+
+ hdmi: qcom,hdmi-tx at 4a00000 {
+ compatible = "qcom,hdmi-tx-8960";
+ reg-names = "core_physical";
+ reg = <0x04a00000 0x1000>;
+ interrupts = <GIC_SPI 79 0>;
+ clock-names =
+ "core_clk",
+ "master_iface_clk",
+ "slave_iface_clk";
+ clocks =
+ <&mmcc HDMI_APP_CLK>,
+ <&mmcc HDMI_M_AHB_CLK>,
+ <&mmcc HDMI_S_AHB_CLK>;
+ qcom,hdmi-tx-ddc-clk = <&tlmm_pinmux 70
+ GPIO_ACTIVE_HIGH>;
+ qcom,hdmi-tx-ddc-data = <&tlmm_pinmux 71
+ GPIO_ACTIVE_HIGH>;
+ qcom,hdmi-tx-hpd = <&tlmm_pinmux 72
+ GPIO_ACTIVE_HIGH>;
+ core-vdda-supply = <&pm8921_hdmi_mvs>;
+ hdmi-mux-supply = <&ext_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pinctrl>;
+ };
+
+ gpu: qcom,adreno-3xx at 4300000 {
+ compatible = "qcom,adreno-3xx";
+ reg = <0x04300000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 80 0>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "mem_clk",
+ "mem_iface_clk";
+ clocks =
+ <&mmcc GFX3D_CLK>,
+ <&mmcc GFX3D_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>,
+ <&mmcc MMSS_IMEM_AHB_CLK>;
+ qcom,chipid = <0x03020002>;
+ qcom,gpu-pwrlevels {
+ compatible = "qcom,gpu-pwrlevels";
+ qcom,gpu-pwrlevel at 0 {
+ qcom,gpu-freq = <450000000>;
+ };
+ qcom,gpu-pwrlevel at 1 {
+ qcom,gpu-freq = <27000000>;
+ };
+ };
+ };
+
+ mdp: qcom,mdp at 5100000 {
+ compatible = "qcom,mdp";
+ reg = <0x05100000 0xf0000>;
+ interrupts = <GIC_SPI 75 0>;
+ connectors = <&hdmi>;
+ gpus = <&gpu>;
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "lut_clk",
+ "src_clk",
+ "hdmi_clk",
+ "mdp_clk",
+ "mdp_axi_clk";
+ clocks =
+ <&mmcc MDP_CLK>,
+ <&mmcc MDP_AHB_CLK>,
+ <&mmcc MDP_LUT_CLK>,
+ <&mmcc TV_SRC>,
+ <&mmcc HDMI_TV_CLK>,
+ <&mmcc MDP_TV_CLK>,
+ <&mmcc MDP_AXI_CLK>;
+// vdd-supply = <&footswitch_mdp>;
+ };
};
};
--
1.9.1
More information about the linux-arm-kernel
mailing list