[PATCH] regulator: rk808: Set the enable time for LDOs

Doug Anderson dianders at chromium.org
Fri Feb 20 16:53:38 PST 2015


The LDOs are documented in the rk808 datasheet to have a soft start
time of 400us.  Add that to the driver.  If this time takes longer on
a certain board the device tree should be able to override with
"regulator-enable-ramp-delay".

This fixes some dw_mmc probing problems (together with other patches
posted to the mmc maiing lists) on rk3288.

Signed-off-by: Doug Anderson <dianders at chromium.org>
---
 drivers/regulator/rk808-regulator.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 1f93b75..3fd4435 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -235,6 +235,7 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_LDO_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(0),
+		.enable_time = 400,
 		.owner = THIS_MODULE,
 	}, {
 		.name = "LDO_REG2",
@@ -249,6 +250,7 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_LDO_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(1),
+		.enable_time = 400,
 		.owner = THIS_MODULE,
 	}, {
 		.name = "LDO_REG3",
@@ -263,6 +265,7 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_BUCK4_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(2),
+		.enable_time = 400,
 		.owner = THIS_MODULE,
 	}, {
 		.name = "LDO_REG4",
@@ -277,6 +280,7 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_LDO_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(3),
+		.enable_time = 400,
 		.owner = THIS_MODULE,
 	}, {
 		.name = "LDO_REG5",
@@ -291,6 +295,7 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_LDO_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(4),
+		.enable_time = 400,
 		.owner = THIS_MODULE,
 	}, {
 		.name = "LDO_REG6",
@@ -305,6 +310,7 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_LDO_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(5),
+		.enable_time = 400,
 		.owner = THIS_MODULE,
 	}, {
 		.name = "LDO_REG7",
@@ -319,6 +325,7 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_LDO_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(6),
+		.enable_time = 400,
 		.owner = THIS_MODULE,
 	}, {
 		.name = "LDO_REG8",
@@ -333,6 +340,7 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_LDO_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(7),
+		.enable_time = 400,
 		.owner = THIS_MODULE,
 	}, {
 		.name = "SWITCH_REG1",
-- 
2.2.0.rc0.207.ga3a616c




More information about the linux-arm-kernel mailing list