[PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage

[Doug Anderson]

Hi,

On Thu, Feb 19, 2015 at 5:04 PM, Doug Anderson <dianders at chromium.org> wrote:
> Hi,
>
> On Thu, Feb 19, 2015 at 3:49 PM, Doug Anderson <dianders at chromium.org> wrote:
>> I've got that coded up but I'm still testing it...  If you want to try
>> it too, you can find it at
>> <https://chromium-review.googlesource.com/251341>.
>>
>> Note that without my patch I find that I _really_ need Addy's patch to
>> make sure that the card isn't busy in setup_bus.  With my patch Addy's
>> code catches the card busy less often.  I'm still trying to see if
>> there's a way to totally remove the need for his setup_bus and still
>> trying to grok all the patches flying around...
>
> Ah, this might be the magic needed:
>
> https://chromium-review.googlesource.com/251344
>
>
> I think that together with the previous patch things are happy for me
> without any of Addy's patches, though it's the end of my work day and
> I haven't given this nearly as much testing as I'd like.
>
> I'll continue testing tomorrow and then post both patches together upstream.

OK, posted three patches upstream...

A little hard to follow all the patches flying around (so I'll
probably reply a few different places with the same info), but I
believe that all of Addy's patches (with the exception of the one
intended to fix mmc_test which needs to be spun by him for a bugfix)
can be replaced with:

* mmc: dw_mmc: Don't start commands while busy
  https://patchwork.kernel.org/patch/5858221/

* mmc: dw_mmc: Make sure we only adjust the clock when power is on
  https://patchwork.kernel.org/patch/5858261/

* mmc: dw_mmc: Give a good reset after we give power
  https://patchwork.kernel.org/patch/5858281/


In order to avoid further spreading info out among several patches,
I'd request that you don't respond here but instead respond to my
posted patches.  Thanks!

-Doug