[PATCH 1/2] ARM: dts: imx6: factor out pinmux for edm1 module
Robert Schwebel
r.schwebel at pengutronix.de
Fri Feb 20 10:53:51 PST 2015
Adding Fabio to Cc, who brought Wandboard into the kernel. Could you
give Michael's patch a try? We don't have a Wandboard here for testing,
so this should get a Tested-By from you (or somebody else with hardware)
before applying.
rsc
On Fri, Feb 20, 2015 at 07:33:14PM +0100, Michael Grzeschik wrote:
> Thw Wandboard is using the EDM1-CF-IMX6 module which is
> defined under the edm standard.
>
> http://www.edm-standard.org/
>
> As this module is used on more boards this patch moves the default
> pinmux settings into the special file imx6qdl-edm1.dtsi.
>
> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> ---
> arch/arm/boot/dts/imx6qdl-edm1.dtsi | 231 +++++++++++++++++++++++++++++++
> arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 99 +------------
> 2 files changed, 233 insertions(+), 97 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6qdl-edm1.dtsi
>
> diff --git a/arch/arm/boot/dts/imx6qdl-edm1.dtsi b/arch/arm/boot/dts/imx6qdl-edm1.dtsi
> new file mode 100644
> index 0000000..b42605b
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-edm1.dtsi
> @@ -0,0 +1,231 @@
> +&iomuxc {
> + pinctrl-names = "default";
> +
> + imx6qdl-edm1 {
> +
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
> + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
> + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
> + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
> + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0
> + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b1
> + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + >;
> + };
> +
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
> + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_spdif: spdifgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart1_rtscts: uart1_rtsctsgrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
> + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
> + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
> + >;
> + };
> +
> +
> + pinctrl_uart2_rtscts: uart2_rtsctsgrp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
> + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x17059
> + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
> + >;
> + };
> +
> + pinctrl_usbh1: usbh1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059
> + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
> + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
> + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
> + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
> + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
> + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
> + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
> + >;
> + };
> +
> + pinctrl_gpmi_nand: gpminandgrp {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
> + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
> + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
> + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
> + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
> + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
> + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
> + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
> + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
> + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
> + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
> + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
> + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
> + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
> + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
> + >;
> + };
> +
> + pinctrl_pwm3: pwm3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x80000000
> + >;
> + };
> +
> + pinctrl_disp0_1: disp0grp-1 {
> + fsl,pins = <
> + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
> + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
> + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
> + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
> + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10
> + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
> + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
> + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
> + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
> + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
> + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
> + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
> + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
> + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
> + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
> + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
> + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
> + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
> + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
> + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
> + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
> + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
> + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
> + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
> + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
> + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
> + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
> + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
> + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
> + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x10
> + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x10
> + >;
> + };
> +
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
> + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
> + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
> + >;
> + };
> +
> + pinctrl_flexcan2: flexcan2grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
> + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
> + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
> + >;
> + };
> + };
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
> index 5fb0916..4cc9251 100644
> --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
> @@ -9,6 +9,8 @@
> *
> */
>
> +#include "imx6qdl-edm1.dtsi"
> +
> / {
> regulators {
> compatible = "simple-bus";
> @@ -94,64 +96,6 @@
>
> imx6qdl-wandboard {
>
> - pinctrl_audmux: audmuxgrp {
> - fsl,pins = <
> - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
> - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
> - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
> - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
> - >;
> - };
> -
> - pinctrl_enet: enetgrp {
> - fsl,pins = <
> - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
> - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
> - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
> - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
> - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
> - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
> - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
> - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
> - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
> - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
> - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
> - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
> - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
> - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
> - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
> - >;
> - };
> -
> - pinctrl_i2c1: i2c1grp {
> - fsl,pins = <
> - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> - >;
> - };
> -
> - pinctrl_i2c2: i2c2grp {
> - fsl,pins = <
> - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> - >;
> - };
> -
> - pinctrl_spdif: spdifgrp {
> - fsl,pins = <
> - MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
> - >;
> - };
> -
> - pinctrl_uart1: uart1grp {
> - fsl,pins = <
> - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
> - >;
> - };
> -
> pinctrl_uart3: uart3grp {
> fsl,pins = <
> MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
> @@ -160,45 +104,6 @@
> MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
> >;
> };
> -
> - pinctrl_usbotg: usbotggrp {
> - fsl,pins = <
> - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
> - >;
> - };
> -
> - pinctrl_usdhc1: usdhc1grp {
> - fsl,pins = <
> - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
> - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
> - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
> - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
> - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
> - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
> - >;
> - };
> -
> - pinctrl_usdhc2: usdhc2grp {
> - fsl,pins = <
> - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
> - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
> - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> - >;
> - };
> -
> - pinctrl_usdhc3: usdhc3grp {
> - fsl,pins = <
> - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
> - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
> - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> - >;
> - };
> };
> };
>
> --
> 2.1.4
>
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list