[PATCH v5 7/9] ARM: dts: Exynos: add 'hdmi' clock to mixer nodes

[Andreas Färber]

Am 02.02.2015 um 14:20 schrieb Marek Szyprowski:
> Mixed block needs to control hdmi clock to properly perform power on/off
> operation, so add 'hdmi' clock also to mixer nodes.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> ---
>  arch/arm/boot/dts/exynos5250.dtsi | 5 +++--
>  arch/arm/boot/dts/exynos5420.dtsi | 5 +++--
>  2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 9bb1b0b738f5..e8c67fdb69fb 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -732,8 +732,9 @@
>  		compatible = "samsung,exynos5250-mixer";
>  		reg = <0x14450000 0x10000>;
>  		interrupts = <0 94 0>;
> -		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
> -		clock-names = "mixer", "sclk_hdmi";
> +		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
> +			 <&clock CLK_SCLK_HDMI>;
> +		clock-names = "mixer", "hdmi", "sclk_hdmi";
>  	};
>  
>  	dp_phy: video-phy at 10040720 {
[snip]

Tested-by: Andreas Färber <afaerber at suse.de>

Without this patch, next-20150218 exynos drm mixer fails to locate the
hdmi clock on Spring.

Kukjin, can you please queue the remaining patches 1-8?

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG Nürnberg)