[PATCH v3 0/8] irqchip: New driver for ST's SysCfg controlled IRQs

[Lee Jones]

Rebased (again) and resending.
 
This driver enables IRQs which are controlled using System Configuration
registers.  Without it Performance Monitoring, Core Sight Tracing and some
L2 Caches will fail to function.
 
v2 => v3:
 - Removed filename from header as suggested by Thomas

v1 => v2:
 - Fixed up Jason's review comments

Lee Jones (8):
  dt: bindings: Supply shared ST IRQ defines
  irqchip: Supply new driver for STi based devices
  irqchip: irq-st: Add documentation for STi based syscfg IRQs
  ARM: STi: STiH416: Enable Cortex-A9 PMU support
  ARM: STi: STiH416: Enable PMU IRQs
  ARM: STi: STiH407: Enable Cortex-A9 PMU support
  ARM: STi: STiH407: Enable PMU IRQs
  ARM: STI: Ensure requested STi's SysCfg Controlled IRQs are enabled at boot

 .../interrupt-controller/st,sti-irq-syscfg.txt     |  35 ++++
 arch/arm/boot/dts/stih407-family.dtsi              |  16 ++
 arch/arm/boot/dts/stih416.dtsi                     |  16 ++
 arch/arm/mach-sti/Kconfig                          |   1 +
 drivers/irqchip/Kconfig                            |   7 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-st.c                           | 206 +++++++++++++++++++++
 include/dt-bindings/interrupt-controller/irq-st.h  |  30 +++
 8 files changed, 312 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
 create mode 100644 drivers/irqchip/irq-st.c
 create mode 100644 include/dt-bindings/interrupt-controller/irq-st.h

-- 
1.9.1