[PATCH] mfd: vexpress: Remove non-DT code

[Lee Jones]

On Tue, 20 Jan 2015, Pawel Moll wrote:

> Now, as all VE platforms have to be booted with DT,
> the code handling non-DT case can be removed.
> 
> Signed-off-by: Pawel Moll <pawel.moll at arm.com>
> ---
>  drivers/mfd/vexpress-sysreg.c | 71 +++++++++----------------------------------
>  1 file changed, 15 insertions(+), 56 deletions(-)

Code looks better and I'm sure you've tested it.

Applied, thanks.

> diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
> index 8f43ab8..3e628df 100644
> --- a/drivers/mfd/vexpress-sysreg.c
> +++ b/drivers/mfd/vexpress-sysreg.c
> @@ -47,71 +47,26 @@
>  #define SYS_HBI_MASK		0xfff
>  #define SYS_PROCIDx_HBI_SHIFT	0
>  
> -#define SYS_MCI_CARDIN		(1 << 0)
> -#define SYS_MCI_WPROT		(1 << 1)
> -
>  #define SYS_MISC_MASTERSITE	(1 << 14)
>  
> -
> -static void __iomem *__vexpress_sysreg_base;
> -
> -static void __iomem *vexpress_sysreg_base(void)
> +void vexpress_flags_set(u32 data)
>  {
> -	if (!__vexpress_sysreg_base) {
> +	static void __iomem *base;
> +
> +	if (!base) {
>  		struct device_node *node = of_find_compatible_node(NULL, NULL,
>  				"arm,vexpress-sysreg");
>  
> -		__vexpress_sysreg_base = of_iomap(node, 0);
> +		base = of_iomap(node, 0);
>  	}
>  
> -	WARN_ON(!__vexpress_sysreg_base);
> -
> -	return __vexpress_sysreg_base;
> -}
> -
> -
> -static int vexpress_sysreg_get_master(void)
> -{
> -	if (readl(vexpress_sysreg_base() + SYS_MISC) & SYS_MISC_MASTERSITE)
> -		return VEXPRESS_SITE_DB2;
> -
> -	return VEXPRESS_SITE_DB1;
> -}
> -
> -void vexpress_flags_set(u32 data)
> -{
> -	writel(~0, vexpress_sysreg_base() + SYS_FLAGSCLR);
> -	writel(data, vexpress_sysreg_base() + SYS_FLAGSSET);
> -}
> -
> -unsigned int vexpress_get_mci_cardin(struct device *dev)
> -{
> -	return readl(vexpress_sysreg_base() + SYS_MCI) & SYS_MCI_CARDIN;
> -}
> -
> -u32 vexpress_get_procid(int site)
> -{
> -	if (site == VEXPRESS_SITE_MASTER)
> -		site = vexpress_sysreg_get_master();
> +	if (WARN_ON(!base))
> +		return;
>  
> -	return readl(vexpress_sysreg_base() + (site == VEXPRESS_SITE_DB1 ?
> -			SYS_PROCID0 : SYS_PROCID1));
> +	writel(~0, base + SYS_FLAGSCLR);
> +	writel(data, base + SYS_FLAGSSET);
>  }
>  
> -void __iomem *vexpress_get_24mhz_clock_base(void)
> -{
> -	return vexpress_sysreg_base() + SYS_24MHZ;
> -}
> -
> -
> -void __init vexpress_sysreg_early_init(void __iomem *base)
> -{
> -	__vexpress_sysreg_base = base;
> -
> -	vexpress_config_set_master(vexpress_sysreg_get_master());
> -}
> -
> -
>  /* The sysreg block is just a random collection of various functions... */
>  
>  static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = {
> @@ -210,6 +165,7 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
>  	struct resource *mem;
>  	void __iomem *base;
>  	struct bgpio_chip *mmc_gpio_chip;
> +	int master;
>  	u32 dt_hbi;
>  
>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -220,11 +176,14 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
>  	if (!base)
>  		return -ENOMEM;
>  
> -	vexpress_config_set_master(vexpress_sysreg_get_master());
> +	master = readl(base + SYS_MISC) & SYS_MISC_MASTERSITE ?
> +			VEXPRESS_SITE_DB2 : VEXPRESS_SITE_DB1;
> +	vexpress_config_set_master(master);
>  
>  	/* Confirm board type against DT property, if available */
>  	if (of_property_read_u32(of_root, "arm,hbi", &dt_hbi) == 0) {
> -		u32 id = vexpress_get_procid(VEXPRESS_SITE_MASTER);
> +		u32 id = readl(base + (master == VEXPRESS_SITE_DB1 ?
> +				 SYS_PROCID0 : SYS_PROCID1));
>  		u32 hbi = (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK;
>  
>  		if (WARN_ON(dt_hbi != hbi))

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog