[PATCH 2/3] arm/dts/ls1021a: Add DCU dts node

[Scott Wood]

On Fri, 2015-02-13 at 19:03 +0800, Jianwei Wang wrote:
> Add DCU node, DCU is a display controller of Freescale
> named 2D-ACE.
> 
> Signed-off-by: Alison Wang <b18965 at freescale.com>
> Signed-off-by: Xiubo Li <lixiubo at cmss.chinamobile.com>
> Signed-off-by: Jianwei Wang <b52261 at freescale.com>
> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index c70bb27..28c37f1 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -383,6 +383,17 @@
>  				 <&platform_clk 1>;
>  		};
>  
> +		dcfb: dcfb at 2ce0000 {
> +			compatible = "fsl,ls1021a-dcfb";
> +			reg = <0x0 0x2ce0000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&platform_clk 0>;
> +			clock-names = "dcfb";
> +			scfg-controller = <&scfg>;
> +			big-endian;
> +			status = "disabled";
> +		};

I don't see "big-endian" in the dcfb binding.

-Scott