[PATCH] arm64: Add L2 cache topology to ARM Ltd boards/models
Lorenzo Pieralisi
lorenzo.pieralisi at arm.com
Thu Feb 12 18:52:51 PST 2015
Hi Mark,
On Thu, Feb 12, 2015 at 02:07:02PM +0000, Mark Rutland wrote:
> Hi,
>
> On Wed, Jan 21, 2015 at 04:46:32PM +0000, Mark Rutland wrote:
> > On Wed, Jan 21, 2015 at 12:02:30PM +0000, Sudeep Holla wrote:
> > > Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache
> > > information") adds cacheinfo support for ARM64. Since there's no
> > > architectural way of detecting the cpus that share particular cache,
> > > device tree can be used and the core cacheinfo already supports the
> > > same.
> >
> > This still leaves the possibility that misleading information is exposed
> > for systems from other vendors. I've made a quick attempt to Cc the
> > authors of other arm64 dts here.
> >
> > Given that in the absence of these nodes we can't derive a complete view
> > of the cache hierarchy, shouldn't we only expose the cacheinfo when we
> > have these nodes and can therefore produce correct values?
>
> I'm still rather concerned about exposing misleading cache info in this
> manner. Is there no way we can limit the exposure of this information to
> those cases where we actually have the information?
The shared cache(s) cpu map information (DT) is retrieved in core code, your
concern is valid but should be addressed in a way that does not break
other archs (eg totally removing cache info if missing DT cache nodes).
> Do we know if/how this will work for ACPI systems?
Yes, there will be bindings, as for the how, that's not publicly
available information.
Thanks,
Lorenzo
>
> Thanks,
> Mark.
>
> > I can imagine that future dts are likely to appear without these nodes,
> > and I imagine that we won't spot all of those cases. We also have
> > existing DTBs to take into account.
> >
> > Thanks,
> > Mark.
> >
> > >
> > > This patch adds the L2 cache topology on Juno board, FVP/RTSM and
> > > foundation models.
> > >
> > > Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
> > > Cc: Mark Rutland <mark.rutland at arm.com>
> > > Cc: Liviu Dudau <Liviu.Dudau at arm.com>
> > > Cc: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> > > ---
> > > arch/arm64/boot/dts/arm/foundation-v8.dts | 8 ++++++++
> > > arch/arm64/boot/dts/arm/juno.dts | 14 ++++++++++++++
> > > arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 8 ++++++++
> > > 3 files changed, 30 insertions(+)
> > >
> > > Hi Arnd/Olof,
> > >
> > > Though this patch and commit 5d425c18653731af6 ("arm64: kernel: add
> > > support for cpu cache information") which is in -next(via arm64) are
> > > dependent to provide desired functionality, then can go indepedently
> > > if you think there could be conflicts if this change is taken via arm64.
> > > If not, Catalin can pick up with your acks after the review.
> > >
> > > Regards,
> > > Sudeep
> > >
> > > diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
> > > index 27f32962e55c..4eac8dcea423 100644
> > > --- a/arch/arm64/boot/dts/arm/foundation-v8.dts
> > > +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
> > > @@ -34,6 +34,7 @@
> > > reg = <0x0 0x0>;
> > > enable-method = "spin-table";
> > > cpu-release-addr = <0x0 0x8000fff8>;
> > > + next-level-cache = <&L2_0>;
> > > };
> > > cpu at 1 {
> > > device_type = "cpu";
> > > @@ -41,6 +42,7 @@
> > > reg = <0x0 0x1>;
> > > enable-method = "spin-table";
> > > cpu-release-addr = <0x0 0x8000fff8>;
> > > + next-level-cache = <&L2_0>;
> > > };
> > > cpu at 2 {
> > > device_type = "cpu";
> > > @@ -48,6 +50,7 @@
> > > reg = <0x0 0x2>;
> > > enable-method = "spin-table";
> > > cpu-release-addr = <0x0 0x8000fff8>;
> > > + next-level-cache = <&L2_0>;
> > > };
> > > cpu at 3 {
> > > device_type = "cpu";
> > > @@ -55,6 +58,11 @@
> > > reg = <0x0 0x3>;
> > > enable-method = "spin-table";
> > > cpu-release-addr = <0x0 0x8000fff8>;
> > > + next-level-cache = <&L2_0>;
> > > + };
> > > +
> > > + L2_0: l2-cache0 {
> > > + compatible = "cache";
> > > };
> > > };
> > >
> > > diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
> > > index cb3073e4e7a8..15dafbb24426 100644
> > > --- a/arch/arm64/boot/dts/arm/juno.dts
> > > +++ b/arch/arm64/boot/dts/arm/juno.dts
> > > @@ -39,6 +39,7 @@
> > > reg = <0x0 0x0>;
> > > device_type = "cpu";
> > > enable-method = "psci";
> > > + next-level-cache = <&A57_L2>;
> > > };
> > >
> > > A57_1: cpu at 1 {
> > > @@ -46,6 +47,7 @@
> > > reg = <0x0 0x1>;
> > > device_type = "cpu";
> > > enable-method = "psci";
> > > + next-level-cache = <&A57_L2>;
> > > };
> > >
> > > A53_0: cpu at 100 {
> > > @@ -53,6 +55,7 @@
> > > reg = <0x0 0x100>;
> > > device_type = "cpu";
> > > enable-method = "psci";
> > > + next-level-cache = <&A53_L2>;
> > > };
> > >
> > > A53_1: cpu at 101 {
> > > @@ -60,6 +63,7 @@
> > > reg = <0x0 0x101>;
> > > device_type = "cpu";
> > > enable-method = "psci";
> > > + next-level-cache = <&A53_L2>;
> > > };
> > >
> > > A53_2: cpu at 102 {
> > > @@ -67,6 +71,7 @@
> > > reg = <0x0 0x102>;
> > > device_type = "cpu";
> > > enable-method = "psci";
> > > + next-level-cache = <&A53_L2>;
> > > };
> > >
> > > A53_3: cpu at 103 {
> > > @@ -74,6 +79,15 @@
> > > reg = <0x0 0x103>;
> > > device_type = "cpu";
> > > enable-method = "psci";
> > > + next-level-cache = <&A53_L2>;
> > > + };
> > > +
> > > + A57_L2: l2-cache0 {
> > > + compatible = "cache";
> > > + };
> > > +
> > > + A53_L2: l2-cache1 {
> > > + compatible = "cache";
> > > };
> > > };
> > >
> > > diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
> > > index efc59b3baf63..20addabbd127 100644
> > > --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
> > > +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
> > > @@ -37,6 +37,7 @@
> > > reg = <0x0 0x0>;
> > > enable-method = "spin-table";
> > > cpu-release-addr = <0x0 0x8000fff8>;
> > > + next-level-cache = <&L2_0>;
> > > };
> > > cpu at 1 {
> > > device_type = "cpu";
> > > @@ -44,6 +45,7 @@
> > > reg = <0x0 0x1>;
> > > enable-method = "spin-table";
> > > cpu-release-addr = <0x0 0x8000fff8>;
> > > + next-level-cache = <&L2_0>;
> > > };
> > > cpu at 2 {
> > > device_type = "cpu";
> > > @@ -51,6 +53,7 @@
> > > reg = <0x0 0x2>;
> > > enable-method = "spin-table";
> > > cpu-release-addr = <0x0 0x8000fff8>;
> > > + next-level-cache = <&L2_0>;
> > > };
> > > cpu at 3 {
> > > device_type = "cpu";
> > > @@ -58,6 +61,11 @@
> > > reg = <0x0 0x3>;
> > > enable-method = "spin-table";
> > > cpu-release-addr = <0x0 0x8000fff8>;
> > > + next-level-cache = <&L2_0>;
> > > + };
> > > +
> > > + L2_0: l2-cache0 {
> > > + compatible = "cache";
> > > };
> > > };
> > >
> > > --
> > > 1.9.1
> > >
> > >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
More information about the linux-arm-kernel
mailing list