[PATCH 1/4] ARM: dts: omap3-pandora: add common device tree
Dr. H. Nikolaus Schaller
hns at goldelico.com
Thu Feb 12 12:09:56 PST 2015
Am 12.02.2015 um 18:47 schrieb Grazvydas Ignotas <notasas at gmail.com>:
> On Thu, Feb 12, 2015 at 3:03 PM, Marek Belisko <marek at goldelico.com> wrote:
>> From: "H. Nikolaus Schaller" <hns at goldelico.com>
>>
>> This device tree allows to boot, supports the panel,
>> framebuffer, touch screen, as well as some more peripherals.
>> Since there is a OMAP3530 based 600 MHz variant and a DM3730 based
>> 1 GHz variant we must include this common device tree code
>> in one of two CPU specific device trees.
>>
>> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>> Signed-off-by: Marek Belisko <marek at goldelico.com>
>> ---
>> arch/arm/boot/dts/omap3-pandora-common.dtsi | 641 ++++++++++++++++++++++++++++
>> 1 file changed, 641 insertions(+)
>> create mode 100644 arch/arm/boot/dts/omap3-pandora-common.dtsi
>>
>> diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
>> new file mode 100644
>> index 0000000..0a2a878
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
>> @@ -0,0 +1,641 @@
>
> ...
>
>> +
>> + gpio-leds {
>> +
>> + compatible = "gpio-leds";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&led_pins>;
>> +
>> + led at 1 {
>> + label = "pandora::sd1";
>> + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
>> + linux,default-trigger = "mmc0";
>> + default-state = "off";
>> + };
>> +
>> + led at 2 {
>> + label = "pandora::sd2";
>> + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
>> + linux,default-trigger = "mmc1";
>> + default-state = "off";
>> + };
>> +
>> + led at 3 {
>> + label = "pandora::bluetooth";
>> + gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
>> + linux,default-trigger = "heartbeat";
>
> I’d prefer this had no trigger, but no strong feelings here.
Ok. Well, this is more or less our testing setup - so that we did see something before
we could fix the display setup. I think practice will show what is better, and then
it can be patched. We are at the beginning of Pandora DT work…
>
>> + default-state = "off";
>> + };
>> +
>> + led at 4 {
>> + label = "pandora::wifi";
>> + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
>> + linux,default-trigger = "mmc2";
>> + default-state = "off";
>> + };
>> + };
>> +
>> + gpio-keys {
>> + compatible = "gpio-keys";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&button_pins>;
>> +
>> + up-button {
>> + label = "up";
>> + linux,code = <KEY_UP>;
>> + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* GPIO_110 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + down-button {
>> + label = "down";
>> + linux,code = <KEY_DOWN>;
>> + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO_103 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + left-button {
>> + label = "left";
>> + linux,code = <KEY_LEFT>;
>> + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* GPIO_96 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + right-button {
>> + label = "right";
>> + linux,code = <KEY_RIGHT>;
>> + gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* GPIO_98 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + pageup-button {
>> + label = "game 1";
>> + linux,code = <KEY_PAGEUP>;
>> + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + pagedown-button {
>> + label = "game 3";
>> + linux,code = <KEY_PAGEDOWN>;
>> + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* GPIO_106 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + home-button {
>> + label = "game 4";
>> + linux,code = <KEY_HOME>;
>> + gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO_101 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + end-button {
>> + label = "game 2";
>> + linux,code = <KEY_END>;
>> + gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; /* GPIO_111 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + right-shift {
>> + label = "l";
>> + linux,code = <KEY_RIGHTSHIFT>;
>> + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* GPIO_102 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + kp-plus {
>> + label = "l2";
>> + linux,code = <KEY_KPPLUS>;
>> + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; /* GPIO_97 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + right-ctrl {
>> + label = "r";
>> + linux,code = <KEY_RIGHTCTRL>;
>> + gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; /* GPIO_105 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + kp-minus {
>> + label = "r2";
>> + linux,code = <KEY_KPMINUS>;
>> + gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* GPIO_107 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + left-ctrl {
>> + label = "ctrl";
>> + linux,code = <KEY_LEFTCTRL>;
>> + gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO_104 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + menu {
>> + label = "menu";
>> + linux,code = <KEY_MENU>;
>> + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; /* GPIO_99 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + hold {
>> + label = "hold";
>> + linux,code = <KEY_COFFEE>;
>> + gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* GPIO_176 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + left-alt {
>> + label = "alt";
>> + linux,code = <KEY_LEFTALT>;
>> + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
>> + gpio-key,wakeup;
>> + };
>> +
>> + lid {
>> + label = "lid";
>> + linux,code = <0x00>; /* SW_LID lid shut */
>> + linux,input-type = <0x05>; /* EV_SW */
>> + gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */
>> + gpio-key,wakeup;
>> + };
>
> This is not right, all button GPIOs are active low except GPIO_100,
> which is active high.
Well, I didn’t notice a difference - but here we should do it right.
> GPIO_108 should not have the wakeup flag set
> because lid switch power is normally cut during low power modes.
Ah, you are right. It is VSIM powered.
>
> ...
>
>> +
>> + dss_dpi_pins: pinmux_dss_dpi_pins {
>> + pinctrl-single,pins = <
>> + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
>> + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
>> + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
>> + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
>> + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
>> + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
>> + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
>> + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
>> + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
>> + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
>> + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
>> + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
>> + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
>> + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
>> + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
>> + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
>> + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
>> + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
>> + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
>> + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
>> + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
>> + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
>> + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
>> + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
>> + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
>> + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
>> + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
>> + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>> + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */
>> + >;
>> + };
>> +
>> + uart3_pins: pinmux_uart3_pins {
>> + pinctrl-single,pins = <
>> + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
>> + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>> + >;
>> + };
>> +
>> + led_pins: pinmux_leds_pins {
>> + pinctrl-single,pins = <
>> + OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */
>> + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */
>> + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */
>> + OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */
>> + >;
>> + };
>> +
>> + button_pins: pinmux_button_pins {
>> + pinctrl-single,pins = <
>> + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_96 */
>> + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_97 */
>> + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_98 */
>> + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_99 */
>> + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_100 */
>> + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_101 */
>> + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_102 */
>> + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_103 */
>> + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_104 */
>> + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_105 */
>> + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_106 */
>> + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_107 */
>> + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_108 */
>> + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_109 */
>> + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_110 */
>> + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_111 */
>> + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_176 */
>
> We should not set pullups for all the buttons, they all have external pullups.
Well, if they are active low, unless a button is pressed it does not matter. If a button is pressed we have 100k and ~30k in parallel
giving approx. 80uA. Anyways, we should take your recommendation.
>
>> + >;
>> + };
>> +
>> + penirq_pins: pinmux_penirq_pins {
>> + pinctrl-single,pins = <
>> + /* here we could enable to wakeup the cpu from suspend by a pen touch */
>> + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLUP | MUX_MODE4) /* GPIO_94 */
>
> Again, we already have external pullup, no need to waste power.
Ok.
>
> ...
>
>> +
>> +&mmc1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mmc1_pins>;
>> + vmmc-supply = <&vmmc1>;
>> + bus-width = <4>;
>> + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
>> + wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */
>
> Large number of pandoras have defective write potect pins. Kernel used
> to not support write protect at all, so we noticed it too late. If
> it's possible to omit this it would be better do so, perhaps with a
> comment, or I can send a patch later…
I think in this case you should send a patch later because you best can describe
the problem in the commit message.
>
>> +};
>> +
>> +&mmc2 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mmc2_pins>;
>> + vmmc-supply = <&vmmc2>;
>> + bus-width = <4>;
>> + cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
>> + wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */
>
> same here
>
>
> Gražvydas
BR,
Nikolaus
More information about the linux-arm-kernel
mailing list