[PATCH V2 RESEND] clk: mxs: Fix invalid 32-bit access to frac registers
Stefan Wahren
stefan.wahren at i2se.com
Thu Feb 12 10:59:00 PST 2015
Hi Fabio,
> Fabio Estevam <festevam at gmail.com> hat am 11. Februar 2015 um 22:10
> geschrieben:
>
>
> On Wed, Feb 11, 2015 at 6:31 PM, Stefan Wahren <stefan.wahren at i2se.com> wrote:
>
> >> I always get 0x5e5b5513 with or without your patch.
> >
> > very strange. Do you have any idea why IO1_STABLE is permanent low?
>
> On my case it is always 1.
i expected the same behavior on my hardware.
Do you use u-boot as bootloader?
>
> > Can you confirm the behavior according to your flash issue?
>
> In my tests IO1_STABLE stays the same.
This wasn't the intension of my second question. I wanted to know about the
state of the SPI NOR flash detection process.
Does it sucessed if you apply the patch, but revert the changes in
clk_ref_set_rate() from clk-ref.c?
>
> > I think it would be the best to revert my patch. Sorry for the trouble.
>
> To be on the safe side, I agree.
>
> Could you please send a revert patch?
Sure.
>
> Thanks
>
Stefan
More information about the linux-arm-kernel
mailing list