[PATCH] dmaengine: at_xdmac: fix for chan conf simplification

[Ludovic Desroches]

When simplificating the channel configuration, the cyclic case has been
forgotten. It leads to use bad configuration causing many bugs.

Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
---
 drivers/dma/at_xdmac.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 710546d..895b8bd 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -664,7 +664,6 @@ at_xdmac_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr,
 	struct at_xdmac_desc	*first = NULL, *prev = NULL;
 	unsigned int		periods = buf_len / period_len;
 	int			i;
-	u32			cfg;
 
 	dev_dbg(chan2dev(chan), "%s: buf_addr=%pad, buf_len=%zd, period_len=%zd, dir=%s, flags=0x%lx\n",
 		__func__, &buf_addr, buf_len, period_len,
@@ -700,17 +699,17 @@ at_xdmac_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr,
 		if (direction == DMA_DEV_TO_MEM) {
 			desc->lld.mbr_sa = atchan->per_src_addr;
 			desc->lld.mbr_da = buf_addr + i * period_len;
-			cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
+			desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
 		} else {
 			desc->lld.mbr_sa = buf_addr + i * period_len;
 			desc->lld.mbr_da = atchan->per_dst_addr;
-			cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+			desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
 		}
 		desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1
 			| AT_XDMAC_MBR_UBC_NDEN
 			| AT_XDMAC_MBR_UBC_NSEN
 			| AT_XDMAC_MBR_UBC_NDE
-			| period_len >> at_xdmac_get_dwidth(cfg);
+			| period_len >> at_xdmac_get_dwidth(desc->lld.mbr_cfg);
 
 		dev_dbg(chan2dev(chan),
 			 "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x\n",
-- 
2.2.0