[PATCH 09/13] ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

[Sascha Hauer]

On Mon, Feb 09, 2015 at 11:27:21AM +0000, Russell King - ARM Linux wrote:
> On Mon, Feb 09, 2015 at 12:25:00PM +0100, Sascha Hauer wrote:
> > On Mon, Feb 09, 2015 at 10:51:34AM +0000, Russell King - ARM Linux wrote:
> > > On Mon, Feb 09, 2015 at 11:47:21AM +0100, Sascha Hauer wrote:
> > > > From: James Liao <jamesjj.liao at mediatek.com>
> > > > 
> > > > This patch adds MT8135 clock controllers into device tree.
> > > > @@ -86,6 +87,18 @@
> > > >  			clock-frequency = <32000>;
> > > >  			#clock-cells = <0>;
> > > >  		};
> > > > +
> > > > +		clk_null: clk_null {
> > > > +			compatible = "fixed-clock";
> > > > +			#clock-cells = <0>;
> > > > +			clock-frequency = <0>;
> > > > +		};
> > > > +
> > > > +		clk26m: clk26m {
> > > > +			compatible = "fixed-clock";
> > > > +			#clock-cells = <0>;
> > > > +			clock-frequency = <26000000>;
> > > > +		};
> > > 
> > > Is this supposed to be here?
> > 
> > The clock support needs at least the clk26m clk. Do you think it should
> > be in another patch or not present at all?
> 
> I didn't see anything which referenced either clk_null or clk26m in this
> patch.  My main concern was that clk_null, but my concern grew when I
> found that clk26m wasn't referenced either.
> 
> If the MT8135 needs it, shouldn't something in its description reference
> this clock?

It's used in the code. The mt8135 clk code directly uses the names of
these three clocks as parent_names.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |