[PATCH] ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage

[Chen-Yu Tsai]

As the sunxi usb clocks all contain a reset controller, it is not
possible to build the sunxi clock driver without RESET_CONTROLLER
enabled. Doing so results in an undefined symbol error:

    drivers/built-in.o: In function `sunxi_gates_clk_setup':
    linux/drivers/clk/sunxi/clk-sunxi.c:1071: undefined reference to
	`reset_controller_register'

This is possible if building a minimal kernel without PHY_SUN4I_USB.

The dependency issue is made visible at compile time instead of
link time by the new A80 mmc clocks, which also use a reset control
itself.

This patch makes ARCH_SUNXI select ARCH_HAS_RESET_CONTROLLER and
RESET_CONTROLLER.

Reported-by: Lourens Rozema <ik at lourensrozema.nl>
Fixes: 559482d1f950 ARM: sunxi: Split the various SoCs support in Kconfig
Cc: <stable at vger.kernel.org> # 3.16+
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---

Since we don't have Kconfig symbols for the clock driver, I figured
this should work. Hope we can get it into one of the rc-s before 3.20
is released.

---
 arch/arm/mach-sunxi/Kconfig | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index a77604fbaf25..81502b90dd91 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,10 +1,12 @@
 menuconfig ARCH_SUNXI
 	bool "Allwinner SoCs" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select PINCTRL
 	select SUN4I_TIMER
+	select RESET_CONTROLLER
 
 if ARCH_SUNXI
 
@@ -20,10 +22,8 @@ config MACH_SUN5I
 config MACH_SUN6I
 	bool "Allwinner A31 (sun6i) SoCs support"
 	default ARCH_SUNXI
-	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_GIC
 	select MFD_SUN6I_PRCM
-	select RESET_CONTROLLER
 	select SUN5I_HSTIMER
 
 config MACH_SUN7I
@@ -37,16 +37,12 @@ config MACH_SUN7I
 config MACH_SUN8I
 	bool "Allwinner A23 (sun8i) SoCs support"
 	default ARCH_SUNXI
-	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_GIC
 	select MFD_SUN6I_PRCM
-	select RESET_CONTROLLER
 
 config MACH_SUN9I
 	bool "Allwinner (sun9i) SoCs support"
 	default ARCH_SUNXI
-	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_GIC
-	select RESET_CONTROLLER
 
 endif
-- 
2.1.4