[PATCH 4/9] mtd: pxa3xx_nand: add a default chunk size

[Boris Brezillon]

On Tue, 27 Jan 2015 15:10:11 +0100
Antoine Tenart <antoine.tenart at free-electrons.com> wrote:

> Add a default chunk size of 512 in the pxa3xx nand driver.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
> ---
>  drivers/mtd/nand/pxa3xx_nand.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 782ae24d6b7d..b2783b1f663c 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -1430,6 +1430,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>  	if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
>  		goto KEEP_CONFIG;
>  
> +	/* Set a default chunk size */

Could you explain why you need to set this default chunk size ?
I guess it's because your NAND is not configured by the bootloader, and
thus you did not specify the keep-config attribute in the DT.
And I guess you need this field to be initialized before pxa_ecc_init is
called (for some NAND operations done in the meantime: READID ?).

Moreover, IMHO this should be place in an 'else' statement, otherwise
you'll overwrite the value set in pxa3xx_nand_detect_config.


> +	info->chunk_size = 512;
> +
>  	ret = pxa3xx_nand_sensing(info);
>  	if (ret) {
>  		dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com